Raspberry Pi Compute Module 3+ (CM3+) SBC Development Kit

  • RS-stocknr. 182-9894
  • Fabrikantnummer Compute Module 3+ Development Kit
  • Fabrikant Raspberry Pi
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Raspberry Pi Compute Module 3+ Development Kit

The Compute Module 3+ (CM3+) development kit includes everything you need to begin embedding Pi functionality into your design.

The CM3+ is a prototyping platform aimed at business and industrial users.

The CM3+ has the same core and features the Broadcom BCM2837B0 SoC from the Raspberry Pi 3 Model B+. The Pi Compute Module is smaller and can be integrated into designs. The module is based on the SODIMM standard so you can use standard connectors and embed into systems and other products.

All modules are CE and FCC compliant.

The Raspberry Pi CM3+ will remain in production until at least January 2024.

Compute Module 3+ Development Kit Contents

● Compute Module IO Board – this serves as an adapter to help set your module up by providing standard connectors including USB, GPIO, HDMI, camera and display
● CM3+/32GB - Compute Module 3+ with 32GB on-board eMMC memory (RS 183-9893)
● CM3+/Lite – Compute Module 3+ Lite without on-board eMMC memory (RS 182-9890)
● Compute Module IO board camera adapter
● Compute Module IO board display adapter
● USB A to micro USB B cable
● 4 X jumper wires

Compute Module 3+ Specifications

Memory: 1GB LPDDR2 SDRAM
Processor: Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.2GHz
Multimedia: H.264, MPEG-4 decode (1080p30), H.264 encode (1080p30), OpenGL ES 1.1, 2.0 graphics
Operating System: NOOBS_3_0_0 (16th November 2018) or later
Board Dimensions: 67.6mm x 31.1mm x 3.7mm (highest component)
Board Weight: 9 grams

The Compute Module IO Board V3 is a development kit for those who wish to make use of the Raspberry Pi in a more flexible form factor, intended for industrial applications. The IO Board V3 is made for developing with CM3, CM3L, and CM1. The Compute Module contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM). The accompanying IO Board is a simple, open-source breakout board that you can plug a Compute Module into. The board hosts 120 GPIO pins, an HDMI port, a USB port, two camera ports, and two display ports. Designing the Module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the Module itself, and you have the freedom to add extra components and place parts exactly where your product needs them.

Specificaties
Kenmerk Waarde
Classification Development Kit
Kit Name Compute Module 3+ (CM3+)
Technology SBC
Device Core Pi-1 Quad-Core CPU
Processor Family Name Raspberry Pi 3
Processor Part Number BCM2837
Processor Type CPU
31 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
92,71
(excl. BTW)
112,18
(incl. BTW)
Aantal stuks
Per stuk
1 +
92,71 €
Related Products
The AFBR-0548Z Evaluation Kit from Avago Technologies evaluates ...
Description:
The AFBR-0548Z Evaluation Kit from Avago Technologies evaluates the AFBR-1624Z fibre optic transmitter and receiver AFBR-2624Z. The Evaluation board incorporates passive components, TTL input/output connectors. It is designed for test set-up, letting you use the 650nm versatile link fibre optic ...
xChips are a rapid electronics development ecosystem to ...
Description:
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.xChips ...
The Arduino MKR VIDOR 4000 is a new ...
Description:
The Arduino MKR VIDOR 4000 is a new age product loaded with hardware and potential: an 8MB SRAM a 2MB QSPI flash chip with 1 MB allocated for user applications. You can essentially create your controller board by using MKR ...
Schematically compatible to the full SDBC-DK3 software development ...
Description:
Schematically compatible to the full SDBC-DK3 software development environment the EZLink fast prototyping kit is designed so engineers can test their code in a small footprint design. Supporting the EZRadio® and EZRadioPRO® platforms, EZLink offers the transceivers (Si4431 or Si4432) ...