Microchip Technology Xplained Pro Prototyping Extension Board - ATPROTO1-XPRO

  • RS-stocknr. 130-6151
  • Fabrikantnummer ATPROTO1-XPRO
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

ATPROTO1-XPRO Xplained Pro Extension Board

The ATPROTO1-XPRO Xplained Pro Extension Board has been designed to prototype small circuits. The board can be categorized into three parts;

1) The Prototyping Area

Both through-hole and SMD components can use the 200 square pads for prototyping. It is very easy to establish accurate connections using the letters and numbers that are marked on both sides of the board. If needed, a solderless breadboard can go on top of the extension board.

2) Top Section

The top section of the extension board breaks away to connect external power to a Xplained Pro MCU board with a screw terminal block.

3) Bottom Section

The bottom section of the extension board consists of a right angled header, a vertical header and a prototyping area.
The right angled header connects to any Xplained Pro MCU board whilst the vertical header can connect both extension modules or extension signals to the protoyping area.

Beneficial characteristics of the Xplained Pro platform are the integration of Atmel Studio, the inclusion of Atmel software framework drivers and demo code and support streaming data.

Features & Benefits of the ATPROTO1-XPRO Extension Board
•200 square pad prototyping area with 2.54 mm spacing
•Supports Xplained Pro Extension Modules
•Solderless breadboard capacity

Specificaties
Kenmerk Waarde
Classification Extension Board
Kit Name Xplained Pro
Technology Prototyping
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
20,97
(excl. BTW)
25,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
20,97 €
Related Products
The ATULPC-DEMO Wearable Demo Reference Design evaluation kit ...
Description:
The ATULPC-DEMO Wearable Demo Reference Design evaluation kit is a hardware platform for developing IoT and Wearable projects. It features a SAML21 low-power microcontroller, a Bluetooth Smart communications module, and an array of motion and environmental sensors. The wearable demonstration ...
The Cypress Semiconductor prototyping kit enables you to ...
Description:
The Cypress Semiconductor prototyping kit enables you to evaluate and develop Cortex-M0 based systems with programmable digital blocks solution using the PSoC 4200DS device. This kit is designed with a snap-away form factor, allowing users to separate the programmer and ...
The PIC10(L)F32x Development Board is intended to be ...
Description:
The PIC10(L)F32x Development Board is intended to be a learning tool for individuals interested in PIC® Microcontroller design and developing applications using the Configurable Logic Cell, Complimentary Waveform Generator and Numerically Controlled Oscillator peripherals. The PIC10F322 microcontroller is ideal ...
The Esplora board from Arduino is packed with ...
Description:
The Esplora board from Arduino is packed with sensors and features an ATmega 32u4 AVR microcontroller. You can also add a TFT LCD using the on-board display connector and attach TinkerKit modules using on-board input and output connectors. That's a ...