ADAFRUIT PRO TRINKET 3V MCU Development Board with ATmega328P - 2010

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Adafruit Pro Trinket Mini Microcontrollers

Adafruit Pro Trinket 5V development board Measures only 38 mm x 18 mm x 2 mm (1.5" x 0.7" x 0.2") (without headers) Provides easy and simple access to the ATtiny85 MCU for development and programming. Small form factor means it can easily be incorporated into prototype/ design.

The pro trinket features Microchip’s ATtiny85 MCU with 8KB program flash, 20 MIPS CPU, 5 PWMs, 2 8 bit timers. Uses the Atmel ATmega328P microcontroller, 28K of flash, 2K of RAM and 18 GPIO.


The Pro Trinket is programmable using the AVRdude and/or the Arduino IDE, and there is a reset button for entering the bootloader or restarting the program as well as LED indication for bootloading. You can also use an FTDI cable to connect to the FTDI port for a serial connection.

The Adafruit Pro Trinket development kit is the bigger, more powerful sister of the Trinket (RS 124-5509, 124-5506) with roughly 4 times the performance and GPIO.

What's on Board?

- Micro-B USB connector for simple connectivity to a PC
- Power with either USB or external output(such as a battery)- it will automatically switch over
- Headers for an FTDI port for reprogramming
- On-board green power LED and red pin #13 LED GPIO pins (18 pins)
- 16MHz clock rate, 28K FLASH available
- Reset button for entering the bootloader or restarting the program.
- I2C/SPI Interface for simple hardware integration
- 3 or 5V Output an onboard regulator provides 3.3V or 5V output for powering LEDs, sensors, small motors, etc.
- External reset pin
- 3 Mounting holes

Works with 99% of existing Arduino sketches (anything that doesn't use more than 28K, and doesn't require pins #2 and #7)

The Pro Trinket is available in two versions:

Pro Trinket 3.3 V - 12 MHz (RS 124-5511)
Pro Trinket 5 V - 16 MHz (RS 124-5507)

Note

Due to its small size, you cannot stack an Arduino shield directly on top of the Pro Trinket.

Adafruit Trinket Microcontrollers (MCU)

Specificaties
Kenmerk Waarde
Classification Development Board
Kit Name PRO TRINKET 3V
Technology MCU
Processor Part Number ATmega328P
Processor Type MCU
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
8,82
(excl. BTW)
10,67
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
8,82 €
5 - 9
8,56 €
10 +
8,38 €
Related Products
The BeagleBone Black Wireless from beagleboard.org is a ...
Description:
The BeagleBone Black Wireless from beagleboard.org is a development board based on the AM335x Arm Cortex-A8 processor, with additional wireless networking functionality. This BeagleBone board is a single board computer (SBC) which is supplied with Debian Linux OS pre-installed and ...
The PIC24FJ256GA705 Curiosity Development Board is a 16-bit ...
Description:
The PIC24FJ256GA705 Curiosity Development Board is a 16-bit development platform targeted at first-time users, Makers, and those seeking a feature-rich rapid prototyping board. The PIC24 used here has a full set of low-power features. • 32MHz PIC24FJ256GA705 16-bit XLP microcontroller ...
The Microchip Technology RS-485 extension-board is ideal for ...
Description:
The Microchip Technology RS-485 extension-board is ideal for evaluation and prototyping applications involving RS485/422. It belongs to the Atmel Xplained Pro series of small-sized and easy-to-use evaluation kits for Atmel AVR 8- and 32-bit microcontrollers and SoC RF modules. It ...
STM8 microcontroller in LQFP64 packageFlash memory size:64/128 Kbytes ...
Description:
STM8 microcontroller in LQFP64 packageFlash memory size:64/128 Kbytes 4 LEDsUSB communication (LD4)5 V STLINK (LD3)User (LD2)Power (LD1)2 push-buttons: USER and RESET32.768 kHz LSE crystal oscillator for the NUCLEO-8L152R8 onlyBoard expansion connectors:Arduino™ Uno V3ST morpho extension pin headers for full ...