Raspberry Pi Compute Module 3 (CM3) I/O Interface Adapter Board

  • RS-stocknr. 123-2013
  • Fabrikantnummer Compute module 3 I/O
  • Fabrikant Raspberry Pi
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Raspberry Pi Compute Module 3 IO Board

The Compute Module IO Board V3 is designed for use with the Raspberry Pi Compute Modules:
• CM1 (826-8825)
• CM3 (123-2011)
• CM3L (123-2012)

This I/O breakout board plugs onto the Compute Module to provide access to various ports that you would see on the traditional Raspberry Pi boards.

Why do I need one?
You can use the CM3 I/O board as an adapter to get your Compute Module set up. The Compute Modules themselves do not have connectors on board, they are designed to be embedded into applications.
That’s where the CM3 I/O board comes in handy. It has all of the things that are harder to add, all on the board already. There is also the ability to add additional components if and when you need them.

What is on the CM3 I/O Board?
20 GPIO pins
HDMI port
USB port
2 x camera ports
2 x display ports.

Note

Raspberry Pi guarantee the availability of CM3 and CM3 Lite until at least January 2023.

Contents

IO Board only.

Specificaties
Kenmerk Waarde
Classification Adapter Board
Kit Name Compute Module 3 (CM3) I/O
Technology Interface
54 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1132 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
124,49
(excl. BTW)
150,63
(incl. BTW)
Aantal stuks
Per stuk
1 +
124,49 €
Related Products
This board demonstrates the performance of Microchip’s MCP6N11 ...
Description:
This board demonstrates the performance of Microchip’s MCP6N11 instrumentation amplifier (INA) and a traditional three op amp INA using Microchip’s MCP6V26 and MCP6V27 auto-zeroed op amps. The input signal comes from an RTD temperature sensor in a Wheatstone bridge. Real ...
Grove - OLED Display 0.96"is an OLED monochrome ...
Description:
Grove - OLED Display 0.96"is an OLED monochrome 128´64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low ...
The Raspberry Pi 2 Model B (V1.2) computer ...
Description:
The Raspberry Pi 2 Model B (V1.2) computer board is the 2nd generation of board from Raspberry Pi. It is the second version of the Raspberry Pi 2 Model B. Processor: Broadcom BCM2837 Quad core (ARM Cortex-A53) SoCMemory: 1GB LPDDR2Ethernet: ...
Digilent’s Pmod OLEDrgb (Revision B) is an organic ...
Description:
Digilent’s Pmod OLEDrgb (Revision B) is an organic RGB LED module with a 96 x 64 pixel display capable of 16-bit colour resolution. Designed to work in conjunction with a host board, communicating via the SPI protocol, the Pmod OLEDrgb ...