Bridgetek NerO Long Pin MCU Reference Design - NerO-LP1

  • RS-stocknr. 110-9118
  • Fabrikantnummer NerO-LP1
  • Fabrikant Bridgetek
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

NerO, Energy-Efficient Design for an Arduino Uno

The FTDI NerO-LP1 is an enhanced design for the Arduino UNO processor board featuring a switchmode +5V regulator for greater efficiency amongst other detail improvements. Like the UNO, it is CE and FCC certified and is suitable for commercial as well as hobbyist applications.

16MHz ATmega328 Microcontroller with Optiboot Bootloader
FT231XS USB-UART bridge
Arduino shield compatible with UNO R3 form factor
Arduino Software (IDE) and UNO library compatible
14 x Digital I/O pins (including 6 x PWM outputs)
6 x Analogue Inputs
MicroUSB connector
Status and Power LEDs
On/Off power switch
Reset pushbutton
Long shield connector pins fitted
Efficient +5V @ 1A switching regulator
Power supply VIN: +7V to +20Vdc (+9V or +12V recommended)

Approvals

CE FCC

Specificaties
Kenmerk Waarde
Classification Reference Design
Kit Name NerO Long Pin
Technology MCU
Processor Family Name ATMEGA328
Processor Type MCU
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
82 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
22,48
(excl. BTW)
27,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
22,48 €
Related Products
Temp&Hum 8 click is based on a sensor ...
Description:
Temp&Hum 8 click is based on a sensor from the popular SHT family, designed to measure temperature and humidity. This sensor family has already become an industry standard, providing proven reliability and stability while requiring a minimum number of components, ...
The Renesas RA6M3 group uses the high-performance Arm® ...
Description:
The Renesas RA6M3 group uses the high-performance Arm® Cortex®-M4F core and offers a TFT controller with 2D accelerator and JPEG decoder. In addition RA6M3 offers Ethernet MAC with individual DMA and USB High Speed interface to ensure high data throughput. ...
The EFM8BB1 Low Cost Kit is an easier ...
Description:
The EFM8BB1 Low Cost Kit is an easier to use yet powerful development starting point. It contains an integrated debugger and a simple USB micro connection to allow rapid prototyping. The board is fully supported in Simplicity Studio including code ...
The Seeed Studio ODYSSEY - X86J4105 redefines the ...
Description:
The Seeed Studio ODYSSEY - X86J4105 redefines the SBC with pre-installed Windows 10 enterprise and Arduino coprocessor on-board, enabling IoT easier than before. The Raspberry Pi compatible 40-Pin allows you to use hundreds of Pi HATs in the market. Dual ...