Digilent Embedded Vision Bundle Development Kit

The Digilent embedded vision bundle makes a valuable tool for anyone looking to develop their own embedded vision products and applications or to learn more about embedded vision concepts. The bundle includes Zybo Z7-20 Zynq-7000 ARM/FPGA SoC development board, Pcam 5C 5-megapixel colour camera module (data is transferred using the Omni vision OV5640 image sensor's native MIPI CSI-2 interface, resulting in low latency) and 15-pin flat-flexible cable. The ZYBO Z7 surrounds the Zynq with a rich set of multimedia and connectivity peripherals to create a formidable single-board computer, even before considering the flexibility and power added by the FPGA. The bundle comes with an SDSoC voucher.

• 1GB DDR3L with the 32-bit bus at 1066MHz
• 16MB Quad-SPI flash with factory programmed 128-bit random number and 48-bit globally unique EUI-48/64 compatible identifier
• Audio codec with stereo headphone, stereo line-in and microphone jacks
• DDR3L memory controller with 8 DMA channels and 4 high-performance AXI3 slave ports
• Gigabit Ethernet PHY with USB 2.0 OTG PHY with host and device support
• High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
• It contents 6 push-buttons, 4 slide switches, 5 LEDs (1 processor connected) and 2 RGB LEDs
• It has 667MHz dual-core Cortex-A9 processor
• Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C
• Pcam camera connector with MIPI CSI-2 support, HDMI sink port (input) with/without CEC and HDMI source port (output) with CEC
• Powered from USB or any 5V external power source
• Programmable from JTAG, Quad-SPI flash and microSD card
• Programmable logic equivalent to Artix-7 FPGA

• Communicate with the board using standard COM port commands
• Industrial use
• SDSoC for embedded vision applications