RS PRO Process Pump Controller for Brushless Micropump Pump, 24 V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Brushless Micro Pump Controller

A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.

Applications

The EQi controller's compact dimensions, ease of installation and efficency make it suitable for a broad range of applicatiosn including
• Research and development
• Laboratory equipment
• Prototyping
• Production equipment

Specificaties
Kenmerk Waarde
Compatible Pump Type Brushless Micropump
Supply Voltage 12 → 30 V dc
Connection 2 Screw Terminal (Input), 3 Screw Terminal (Output)
Maximum Output Pressure 10bar
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
65,61
(excl. BTW)
79,39
(incl. BTW)
Aantal stuks
Per stuk
1 +
65,61 €
Related Products
The Xylem Jabsco electric central heating DC pump ...
Description:
The Xylem Jabsco electric central heating DC pump is the latest innovation used wherever a highly efficient circulation pump is needed without a direct connection to AC power. This magnetically coupled impeller pump is characterised by its small size, high-efficiency, ...
The LINEARdrive AC series of mains constant voltage ...
Description:
The LINEARdrive AC series of mains constant voltage drivers, from EldoLED, are ideal for low-power, full-colour LED lighting applications. Compatible with 0-10V, LedSync, DMX-RDM and DALI, LINEARdrive AC LED drivers can be set to 12V or 24V output to suit ...
The STEVAL-IHM035V2 is designed to drive a high ...
Description:
The STEVAL-IHM035V2 is designed to drive a high voltage/low power 3-phase brushless motor, either synchronous or asynchronous. It is based on the STGIPN3H60, SLLIMM™-nano Intelligent Power Module (IPM). Nominal power up to 100WCompatible with 3.3V and 5V control boardSingle shunt ...
Pump control, Alternating/parallel. Alternated access of two pumps ...
Description:
Pump control, Alternating/parallel. Alternated access of two pumps or other devicesEven distribution of dutyParallel duty at high demand Operation using 1 or 2 input signals (two modes of operation)Timing offset of the two loads to avoid water hammer effcectsSupply voltage ...