Parker Needle Valve 4A-V4LR-SS, 1/4 in

  • RS-stocknr. 432-5195
  • Fabrikantnummer 4A-V4LR-SS
  • Fabrikant Parker
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving
//media.rs-online.com/t_line/L432507-01.gif
//media.rs-online.com/t_line/L432519-01.gif
//media.rs-online.com/t_line/L432519-02.gif
//media.rs-online.com/t_line/L432519-03.gif
//media.rs-online.com/t_line/L432519-04.gif
//media.rs-online.com/t_line/L432519-05.gif

Parker Needle Valve

The Parker V4 series needle valve has an inline orientation with 1/4in double ferrule tube fitting ends and a maximum pressure of 345bar. It has a blunt (hard seat) stem configuration and Teflon stem packing. This valve is designed to provide positive leak tight shut-off and coarse regulation of fluids in process and instrumentation applications, providing the user with the utmost in flexibility. It is available in five integral bonnet designs with packing above the stem threads.

Features and Benefits

Inline and angle patterns standard
316 stainless steel and brass construction standard
Maximum working pressure is 345bar (5,000psig)
Operating temperature ranges between -54°C and 232°C

Specificaties
Kenmerk Waarde
Valve Orientation Inline
Connection 1/4 in
Body Material Stainless Steel
Maximum Working Pressure 345 bar
Flow Factor Kv 0.37m³/h
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
58,10
(excl. BTW)
70,30
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
58,10 €
5 +
56,32 €
Related Products
The Super Speedfit Acetal Single Check Valve by ...
Description:
The Super Speedfit Acetal Single Check Valve by John Guest was designed at the request of leading companies in the drinks dispense industry. The fast installation time and low headloss design ensures protection against the reversal of flow. This check ...
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRAS approvedSmall and quiet in operationMinimum working pressure 0.15 barFits most tanks and cisternsManufactured from 4-ton tensile strength engineering resin to high tolerancesAvailable for side and bottom ...
High quality lubricated packingNon rising stemCan be re-packed ...
Description:
High quality lubricated packingNon rising stemCan be re-packed under pressureSolid brass wedgeBSI Kitemark approved: License no. KM-06045.Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356.
40 BAR ratedDouble ActingBody Hot pressed brassEnd cap ...
Description:
40 BAR ratedDouble ActingBody Hot pressed brassEnd cap Hot pressed brassBall Brass chrome platedSeat ring P.T.F.E.Body seal P.T.F.E.Stem BrassStem ring VitonO-ring NBR 70.