PRESS SWITCH:20 TO 300 BAR DIN

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CZ
Productomschrijving

OsiSense XMLA Pressure Switches

Schneider Electric XMLA pressure switches for control circuits are used to control the pressure of hydraulic oils, fresh water, sea water, air, steam, corrosive fluids, or viscous products. The XMLA pressure and vacuum switches have a fixed differential and are for detection of a single threshold.

Fixed differential
External pressure setting window available
1 NO & 1 NC snap acting contacts
Temperature range: –25 to +70 °C
Enclosure rating: IP65 with plug-in connector, IP66 with terminal connections
Operating rate: up to 120 operations / min. for diaphragm and 60 / min. for piston
Media connection: 1/4" NPT
Conduit connection: 1/2" NPT

Note

Pressure quoted is 'per cycle' and (occasional)

15 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
175,00
(excl. BTW)
211,75
(incl. BTW)
Aantal stuks
Per stuk
1 +
175,00 €
Related Products
Fluke 729 Automatic Pressure Calibrator has been designed ...
Description:
Fluke 729 Automatic Pressure Calibrator has been designed specifically with process technicians in mind to simplify the pressure calibration process and provide faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 ...
Pressure switches that allow microswitch operation once a ...
Description:
Pressure switches that allow microswitch operation once a pre-set pressure is reached. K and K3 Series incorporate a mechanical stop providing over-pressure protection for the spring and microswitch. Electrical connections for all models to DIN 43650. A range of switches ...
The Crouzet 81 series pressure switch has a ...
Description:
The Crouzet 81 series pressure switch has a maximum operating pressure of 8bar. This switch has a 4mm diameter of push-in connection for semi-rigid tubing. This switch is available without manual override.WarningWhile generally considered a safe source of energy, compressed ...
Festo PE series pressure micro switches for use ...
Description:
Festo PE series pressure micro switches for use at variuos stages of pneumatic systems. Available in a variety of configurations for suit a wide range of applications.