Druck ATEX Gauge for Fluid Pressure Sensor, 250mbar Max Pressure Reading , 9 30 V dc, G1/4, IP65

  • RS-stocknr. 285-289
  • Fabrikantnummer X610-02G-1300
  • Fabrikant Druck
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Druck Precision Pressure Transmitters

Forming part of Druck’s PTX 600 series, this range of pressure transmitters offer a high level of stability, measurement accuracy and stability. Created and designed for critical applications within industrial and research environments, featuring proven silicon technology that has been developed to provide a miniature micro-machined diaphragm. These gauge style pressure sensors are the perfect solution for continuous monitoring in hazardous environments.

Features & Benefits

• Metal seal assembly provides exceptional thermal and stress isolation
• Two-wire electronics includes power supply regulation and amplifier stages
• Independent zero and span controls, zero offset and span setting ±5% site adjustable by sealed, noninteracting potentiometers
• Reverse polarity and over-voltage protection
• RFI bulkhead provides feedthrough filters within the body tube assembly
• The PTX 600 series has a range of 1.5 (100 mbar) through to 10,000 psi (700 bar)
• Rugged compact design
• Great protection against electrical interference
• The transmitter provides an integral female pressure port - 1/4" NPT female
• Fluids compatible with a fully welded assembly of 316 stainless steel and Hastelloy C276 (NACE compatible grades)
• The overall length is 139mm and a diameter of 38mm
• DIN 43650 electrical connector is supplied
• Comprised of hardwearing, aesthetically pleasing stainless steel
• Suitable for use within Zone "O" Gas Group IIC, Temperature Class T4
• G'BSP connection
• Transmitter Supply Voltage: 9-30VDC
• Output Current: 4-20mA (2 wire configuration)
• Temperature effects: less than 0.5% FS over 15° to +122°F- typically 0.3% FS, 15° to +122°
• Gauge configuration (sealed gauge for pressure above 1000 PSI - Absolute for 11.5 to 17 PSI model)

Did you know?

If a product is intrinsically safe, it means that it is incapable of releasing sufficient electrical and thermal energy under normal or abnormal conditions. This results in the item not being able to cause ignition of a specific hazardous atmospheric mixture in its most easily ignited concentration.

Note

Supplied with instruction leaflet, a copy of certificates are available upon request

Specificaties
Kenmerk Waarde
Pressure Reading Type Gauge
Minimum Pressure Reading 0mbar
Maximum Pressure Reading 250mbar
Accuracy ±0.08 %
Output Type Analogue
Media Measured Fluid
Process Connection G1/4
Analogue Output 4 20 mA
Electrical Connection DIN 43650 Type A
Supply Voltage 9 30 V dc
Housing Material Stainless Steel
IP Rating IP65
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Hazardous Area Certification ATEX
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
868,53
(excl. BTW)
1.050,92
(incl. BTW)
Aantal stuks
Per stuk
1 +
868,53 €
Related Products
The RS PRO filter loss gauge is a ...
Description:
The RS PRO filter loss gauge is a general-purpose manometer, suitable for positive, negative and differential pressure measurements. This precision, clear plastic gauge has the benefit of giving a continuous display of the filter condition. There is no limit to ...
Pressure transducer for absolute pressureZero point adjustment using ...
Description:
Pressure transducer for absolute pressureZero point adjustment using detachable magnetic pin, realisation using Reed contact in sensorThick film DMS operating principleIndustrial grade, for hydraulics, pneumatics and general applications.
ifm electronic PN 2xxx series pressure sensors offers ...
Description:
ifm electronic PN 2xxx series pressure sensors offers a flexible design that allows the sensor to rotate in any direction once fitted. With selectable dual switched NC/NO outputs or a single switched output and a scalable analogue output. The PN ...
Schneider Electric XMLA pressure switches for control circuits ...
Description:
Schneider Electric XMLA pressure switches for control circuits are used to control the pressure of hydraulic oils, fresh water, sea water, air, steam, corrosive fluids, or viscous products. The XMLA pressure and vacuum switches have a fixed differential and are ...