Reliance 4.5bar Temperature and Pressure Relief Valve with Male BSP 1/2 in BSP Male Connection

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

Full Cartridge Pressure and Temperature Relief Valve

All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system.

Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.

The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used

Protect against temperature rising above 95゚C
Prevent over pressurisation
Twist toop cartridge design for easy servicing
Range of different pressure settings and different probe lenghts

Note

(7948432 no PTFE), (7948439, 7948448 and 7948457 with probe)

Approvals

WRAS

Specificaties
Kenmerk Waarde
Connection 1/2 in BSP Male
Maximum Set Pressure 4.5bar
Maximum Temperature +95°C
For Use With Hot Water
Connection Gender Male
Thread Size 1/4in
Thread Standard or Connection Type BSP
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
54,98
(excl. BTW)
66,53
(incl. BTW)
Aantal stuks
Per stuk
1 +
54,98 €
Related Products
For heating, sanitary and compressed air systems, pumps ...
Description:
For heating, sanitary and compressed air systems, pumps and autoclavesBody in hot forged DZR brassThreading to BS2779Hostaform inner valveSpring in 18//8 AISI 302-304 stainless steelHydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)Compact design, allows flow in one direction only, ...
RS Pro Brand Screwed End Swing Check Valves ...
Description:
RS Pro Brand Screwed End Swing Check Valves that allow liquids to flow in only one direction. 1/2 - 3" (DN15 - DN80)W.P: 200 WOGW.T: -20°C - 200°C (-4°F - 392°F)Investment castingSocket weld (option)Thread type: ASME B1.20.1 (NPT), DIN 2999 ...
Ball valve type 546 PVC-U with solvent cement ...
Description:
Ball valve type 546 PVC-U with solvent cement sockets. Suitable for use in water treatment, ship building, food and beverage, CPI and microelectronics. Union type ends, easy installation/removalSolvent cement jointing, plain borePTFE Ball SealsOperating Temperature Range 0°C to 60°CErgonomic handle. ...
Legionella is a bacterium that lives and proliferates ...
Description:
Legionella is a bacterium that lives and proliferates in natural and artificial aquatic environments at temperatures ranging between 5.7°C and 55°C, and stands up to acidic and alkaline environments. New s.84 maintains certification for use with gas and adds approval ...