Asco Pressure Reducing Valve, 1 in G

  • RS-stocknr. 306-2039
  • Fabrikantnummer E290B053
  • Fabrikant Asco
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Pressure-operated solenoid valves

E290 series range of solenoid valves, 2 // 2 N/C piston-type operators for all neutral (bronze) or corrosive (stainless steel) fluids.
Fluid entry under valve disc.
High flow rate.
Designed to eliminate water hammer.
High-performance stuffing box.

Two-way Valves and Control Modules

Valves and control modules designed specifically to operate together, provide a valve opening which is proportional to the input signal and allows this to be correlated to the respective operating conditions.

Two-way Proportional Flow Valves & Control Modules

Specificaties
Kenmerk Waarde
Connection 1 in G
Minimum Outlet Pressure 0bar
Maximum Outlet Pressure 10bar
Body Material Stainless Steel
Maximum Flow Rate 275L/min
Connection Gender Female
Connection Size 1in
Thread Standard or Connection Type G
Outlet Pressure Range 0 10bar
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
355,10
(excl. BTW)
429,67
(incl. BTW)
Aantal stuks
Per stuk
1 +
355,10 €
Related Products
Air vents automatically remove air and other incondensable ...
Description:
Air vents automatically remove air and other incondensable gases from steam systems, reducing heat transfer and affecting steam temperature. They improve heat transfer, while saving energy, and maintain process performance where temperature is critical. Their use reduces corrosion and maintenance ...
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM sealsCreep resistant bearingsReinforced nylon handleReduced risk of contamination by top and bottom sealsOperating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 barPolished disc.
Type 514 are a new generation of ABS ...
Description:
Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicity.Instead of the commonly used four metal screws it has a central union nut ...
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 barRising StemThreaded bonnetRenewable disc which is suitable for steam serviceBronze trim with glass filled PTFE diskBS21 Taper thread ...