- RS-stocknr.:
- 202-2979
- Fabrikantnummer:
- MA-40-10-G1/4-EN
- Fabrikant:
- Festo
48 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 14,59
(excl. BTW)
€ 17,65
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 14,59 |
- RS-stocknr.:
- 202-2979
- Fabrikantnummer:
- MA-40-10-G1/4-EN
- Fabrikant:
- Festo
Wetgeving en conformiteit
- Land van herkomst:
- PL
Productomschrijving
Festo G 1/4 Pneumatic Pressure Gauge, 10 Bar - MA Series - MA-40-10-G1/4-EN
This Festo pneumatic pressure gauge is used to measure medium to very high pressure levels and is suitable for use in compressors. The mechanical component does not need a power source to operate and offers a long service life. It's a Bourdon-tube pressure gauge, a type that's known for its uncomplicated design combined with highly accurate pressure readings. This component is analogue but can be modified to provide electrical outputs. It has an ABS (acrylonitrile butadiene styrene) thermoplastic housing that withstands heavy use and tough environmental conditions.
• Connection size of G 1/4
• Gauge outside diameter of 40 mm
• Maximum pressure measurement of 10 bar
• Minimum pressure measurement of 0 bar
• Line installation mounting type
• Ambient temperature range of -20°C to +60°C
• IP43 (ingress protection) rating for protection from objects greater than 1 mm and high-pressure water jets
• Gauge outside diameter of 40 mm
• Maximum pressure measurement of 10 bar
• Minimum pressure measurement of 0 bar
• Line installation mounting type
• Ambient temperature range of -20°C to +60°C
• IP43 (ingress protection) rating for protection from objects greater than 1 mm and high-pressure water jets
Range Information
• The range of Festo MA pressure gauges is suitable for front-panel or in-line installation and includes display ranges up to 16 bar or 230 psi (pounds per square inch)
• The units are designed to offer precise pressure readings in pneumatic control systems. This range includes both low-pressure and precision-pressure gauges
• The units are designed to offer precise pressure readings in pneumatic control systems. This range includes both low-pressure and precision-pressure gauges
The Festo pressure gauge with display unit in bar and psi which Indicating range 0 - 1 MPa. It has bourdon-tube pressure gauge of structure and ABS housing material. Its nominal size of pressure gauge is 40.
Ambient temperature -20 to 60 °C
Protection class IP43
Protection class IP43
Specificaties
Kenmerk | Waarde |
---|---|
Maximum Pressure Measurement | 10bar |
Mounting Type | Back Entry |
Minimum Pressure Measurement | 0bar |
Display Type | Analogue |
Connection Size | G 1/4 |
Gauge Outside Diameter | 40mm |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +60°C |
- RS-stocknr.:
- 202-2979
- Fabrikantnummer:
- MA-40-10-G1/4-EN
- Fabrikant:
- Festo