Enerpac Pressure Gauge Mounting Block, NPTF 3/8 Male, CR-400 Coupler

  • RS-stocknr. 903-3585
  • Fabrikantnummer GA45GC
  • Fabrikant Enerpac
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: IN
Productomschrijving

Gauge Adapter Assembly

Pressure gauge adaptor assembly fitted with a 0-700 bar 70mm pressure gauge, mounted at 45 degree for easier viewing and a 700 bar high flow coupler (CR-400) with 35 l/min flow capacity. When used in conjunction with ENERPAC’s pumps and lifting cylinders provides an easy way to check pressure during operation.

45° angled gauge improves visibility
Slim and narrow design
Easy to fit in a broad range of systems
Maximize controlled load movement
Glycerin dampened gauge with dual scale
Enerpac High Flow female coupler.

Hose Fittings & Accessories

Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads.

Note

Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).

Specificaties
Kenmerk Waarde
Connector A NPTF 3/8 male
Gauge Port NPTF 1/4
Connector B CR-400 Coupler
Connector A - Thread Standard NPTF
Connector A - Gender Male
Connector B - Gender Female
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
201,83
(excl. BTW)
244,21
(incl. BTW)
Aantal stuks
Per stuk
1 +
201,83 €
Related Products
Range of W series (WPD) distribution blocks from ...
Description:
Range of W series (WPD) distribution blocks from Weidmuller. These distribution blocks range from 0.05 mm² to 300 mm² allowing you to have diverse options for your application. The WPD series distribution blocks are housed with Wemid for increased safety ...
Suitable for all individual Excelon units. ...
Description:
Suitable for all individual Excelon units.
Enables a pressure gauge to be installed between ...
Description:
Enables a pressure gauge to be installed between the hydraulic hand pump and the high pressure hydraulic hose1/2x3/8x3/8in NPT F-M-F.
Components for use with the Enerpac range of ...
Description:
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads. For easy mounting of a pressure gauge onto a high pressure systemThe 3/8 in. ...