Baumer Barrel Nickel Plated Brass 10 Hz Position Sensor, 2 (dc) mA, 50 (ac) mA, IP67

  • RS-stocknr. 341-430
  • Fabrikantnummer MY COM H 75/80
  • Fabrikant Baumer
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

My-Com Precision Position Switches

High precision measuring and control switches which can be used in a mass production environment as a control gauge to measure length, diameter or centralisation. They may also be used to detect small expansions due to temperature and pressure changes.

Nickel plated brass housing
Activating force 75g
Repeatability ±0.001mm
Hysteresis ±0.002mm
Mechanical life 106 operations
Switching frequency 10Hz
Ruby or sapphire switches
Temperature range -20 → +75°C

Note

Stock no. 446-0254 is not illustrated, this is a Plug-In termination and requires an M8 3pin lead. For a suitable lead see Stock no. 290-4437 typically. Pre-Wired types are terminated with 800mm of PVC cable.

Specificaties
Kenmerk Waarde
Body Style Barrel
Switching Frequency 10 Hz
Terminal Type Wire Lead
Switching Current 2 (dc) mA, 50 (ac) mA
Maximum AC Voltage 24V
Maximum DC Voltage 15V
Housing Material Nickel Plated Brass
IP Rating IP67
Length 25mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
43 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
182,39
(excl. BTW)
220,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
182,39 €
Related Products
Plastic housed, flush or non-flush mounting switches protected ...
Description:
Plastic housed, flush or non-flush mounting switches protected to IP67Supply voltage 10 to 30VdcOperating temperature range -25 to +75°CResponse delay 2msPNP transistor outputSwitching current 300mASwitching frequency 5000HzLED status indicatorShort circuit and reverse polarity protection.
Range of measurement and precision control switches.Very accurate ...
Description:
Range of measurement and precision control switches.Very accurate switch point, with a repeat accuracy of ±0.001 mm.Ruby or saphire switches.Nickel-plated brass housing, IP67 for the My-Com H75/80.PVC, 80 cm cable connection.Applications: quality control, jigs, positioning control, dilation control, small-scale ...
The highly versatile AMM20B Series non-contacting multi-turn rotary ...
Description:
The highly versatile AMM20B Series non-contacting multi-turn rotary position sensor has a 12-bit resolution, a rotational life of up to 50 million cycles and a factory programmable electrical angle from 1080 to 3600 degrees. Designed to meet the specifications of ...
This thermistor assembly consists of a NTC thermistor ...
Description:
This thermistor assembly consists of a NTC thermistor soldered to a single insulated TPE extension cable. The sensor and the extension cable are moulded together as one hot vulcanised unit to give a high degree of protection against water/moisture ingress. ...