Connector Kit for use with MPS-30 Series

  • RS-stocknr. 764-7114
  • Fabrikantnummer Connector Kit E12
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Connector Kit for Mean Well MPS-30 Series Medical Open Frame AC-DC Power Supply

Connector Kit for use with Mean Well the MPS-30 series medical open frame AC-DC power supplies.
This connector kit contains the following:
1 x Molex part number 41791-5 (5 way)
1 x Molex part number 41791-4
9 x Molex crimp pins

Specificaties
Kenmerk Waarde
Accessory Type Connector Kit
For Use With MPS-30 Series
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
9,22
(excl. BTW)
11,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
9,22 €
5 - 9
8,76 €
10 - 24
8,30 €
25 - 49
7,83 €
50 +
7,38 €
Related Products
Industrial quality 2000VA generator6.5HP (4 stroke) engineRecoil startWill ...
Description:
Industrial quality 2000VA generator6.5HP (4 stroke) engineRecoil startWill run continuously for approximately 3 hours on a full tankFuel consumption: 1.22L/hrDual voltage system, 2.5kW reliable Meccalte alternator with 16 amp industrial sockets, 1 x 110V and 1 x 230V30mm tubular steel ...
XP Power DIN Rail clip kits are an ...
Description:
XP Power DIN Rail clip kits are an essential accessory for the DTE40-60 Series. The clips are made from a flame retardant, black nylon and include hardware, screws and a drilling template.See typical RS stock numbers 122-6625 (DTE40) & 122-6635 ...
Heatsink for TEN15, TEN20WIN, TEN20WIR, TEN30, TEN30WIN, TEN60 ...
Description:
Heatsink for TEN15, TEN20WIN, TEN20WIR, TEN30, TEN30WIN, TEN60 and TEN60WIN series DC-DC converters. This heatsink is made from aluminium with a black anodic treatment finish with a thermal impedance after assembly of 10 K/W. This DC-DC converter heatsink is supplied ...
Heatsink for TEN40, TEN40WI and TEN60 series DC-DC ...
Description:
Heatsink for TEN40, TEN40WI and TEN60 series DC-DC converters. This heatsink is made from aluminium with a black anodic treatment finish with a thermal impedance after assembly of 7.6 K/W. This DC-DC converter heatsink is supplied with a thermal pad ...