Siemens SITOP, Dual Redundancy Module - 10 → 58V Input Voltage, 24V Output Voltage, 20A Output Current

  • RS-stocknr. 201-0700
  • Fabrikantnummer 6EP4346-7RB00-0AX0
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: AT
Productomschrijving

The Siemens DIN Rail mount power supply is used as redudancy module. It has voltage rating 24/48V and has current rating of 10A.it has protection Class III and IP20 as degree of protection.

Suitable for decoupling
Ambient temperature during operation -25 to +70 °C
Connection technology is push-in terminals

Specificaties
Kenmerk Waarde
Series SITOP
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22/12/2020, met een levertijd van 1 werkdag.
Prijs Each
71,00
(excl. BTW)
85,91
(incl. BTW)
Aantal stuks
Per stuk
1 +
71,00 €
Related Products
The UF40 buffer module from Puls is a ...
Description:
The UF40 buffer module from Puls is a supplementary device designed for use with regulated DC 24 V power supplies. The buffer module utilises service-free electrolytic capacitors for storing energy, allowing usage at temperatures up to 70°C.The module does not ...
20A Enclosed Redundancy Module to improve overall system ...
Description:
20A Enclosed Redundancy Module to improve overall system operation reliability, Support 1+1 and N+1 redundancy system, 2 channels input and 1 output, DC OK, Input 12Vdc. Support 1+1 and N+1 redundancy system2 channels inout and 1 outputSuitable for redundancy operation ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...
The PULS UF series buffer module has service ...
Description:
The PULS UF series buffer module has service free electrolytic capacitors. The Buffer units can be connected in parallel to increase the output capacity or the hold-up time. It is easy to install and does not need a control wiring. ...