Rohde & Schwarz HM6050-2S Power Quality Analyser

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CZ
Productomschrijving

R&S HM6050-2 Line Impedance Stabilisation Network

The HM6050-2 line impedance stabilization network (LISN) is basically a filter network.

Features

Measurement of Line-conducted Interference within the Range from 9kHz…30MHz (CISPR 16)
Selectable Transient Limiter
Artificial Hand Connector A lowpass filter connects the DUT to the AC power lines.
The LISN presents the signal with a well-defined impedance
For measurements with a spectrum analyzer/EMC receiver, the EMC signal is available after having
passed through a highpass filter.
Two identical networks provide the asymmetric noise emission signals of the DUT’s L1 and N power lines
The user can choose between the signals; the selected signal will be available at the HM6050-2’s test signal output
EMI pre-compliance measurements in engineering labs
Remotely controlled EMI measurements for EMC diagnosis and pre-compliance
HM6050-2D (DE Version) 230V ±10%, 50 Hz to 60Hz
HM6050-2K (UK Version) 230V ±10%, 50Hz to 60Hz
HM6050-2S (US Version) 115V ±10%, 50Hz to 60Hz

Specificaties
Kenmerk Waarde
Absolute Maximum Current Measurement 16A
Maximum Voltage 115V ac
Measurement Type Impedance
Power Source Mains
Width 380mm
Model Number p HM6050-2S
Maximum Frequency 30MHz
Minimum Frequency 9 kHz
Maximum Operating Temperature +40°C
Weight 6kg
Dimensions 285 x 380 x 125mm
Minimum Operating Temperature +10°C
Height 125mm
Length 285mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28/02/2020, met een levertijd van 1 werkdag.
Prijs Each
1.200,00
(excl. BTW)
1.452,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.200,00 €
Related Products
Three-phase energy and power failure analyserPower and energy ...
Description:
Three-phase energy and power failure analyserPower and energy analysis in supply networksHarmonics analysis in accordance with EN 61000-4-7Network quality in accordance with EN50160 with statistical bar chartFlicker analysis as per standard EN 61000-4-15Recording of power-on operations and errorsAnalysis module ...
The N6705C DC Power Analyzer provides unrivaled productivity ...
Description:
The N6705C DC Power Analyzer provides unrivaled productivity gains for sourcing and measuring DC voltage and current into the DUT (device under test) by integrating up to 4 advanced power supplies with DMM, Scope, Arb, and Data Logger features. The ...
The 6812C AC power source/analyser from Keysight is ...
Description:
The 6812C AC power source/analyser from Keysight is a performance AC test solution with 375 VA maximum output power and a built-in arbitrary waveform generator. 20 Vrms test signal (Option 001)High-speed measurements: 5.6 ms201 points list sweepVersatile PC connectivity (LAN, ...
HMC8015 is the first compact tester for AC/DC ...
Description:
HMC8015 is the first compact tester for AC/DC load and standby current characterisation to enable measurements without extra requirements such as computers or remote infrastructure. It features a numerical and graphical display with 26 key parameters. Its performance and compliance ...