Fluke I430-FLEXI-TF-II-4PK Power Quality Analyser Clamp, Accessory Type Flexible AC Current Probe, For Use With Fluke

  • RS-stocknr. 818-7350
  • Fabrikantnummer I430-FLEXI-TF-II-4PK
  • Fabrikant Fluke
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: RO
Productomschrijving

i430-Flexi-TF-II 6000A Flexible AC Current Probe

The i430-Flexi-TF-II flexible AC current probe is optimized for current measurement on thick and hard to reach conductors. The i430-Flexi-TF-II is a flexible AC current probe for use with the Fluke 430 series Power Quality Analyzers including Series II.

Measuring range: 0.5 to 6000 A ac
Bandwidth (-3 dB): 10 Hz to 10 kHz
Output signal: 86.6 mV at 1000A/50Hz (on 1 MΩ), 85.0 mV at 1000A/50Hz (on 50 kΩ)
Maximum non-destructive current: 100 kA (50/60 Hz)
Transducer length: 610 mm (24 in)
Transducer diameter: 7.5 mm (0.3 in)
Minimum bending radius: 38 mm (1.5 in)
Cable length from transducer to BNC: 2.5 m (98.4 in)
Complies with: IEC 61010-1: Pollution degree 2, IEC 61010-2-032: 1000V CAT III/ 600V CAT IV, IEC 61010-031

Supplied with

Instruction Sheet

Fluke Flexible AC Current Probe

The Fluke flexible AC current probe has a current measuring range from 0.5A to 6000A. This lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source. It is also available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4 pack is perfect for use with 3-phase tools such as the Fluke 430 series.
Supplied with
Instruction Sheet

Features and Benefits

Bandwidth (-3dB): 10Hz to 10kHz
Output signal is 86.6mV at 1000A/50Hz (on 1 Mohm), 85.0mV at 1000A/50Hz (on 50kohm)
Maximum non-destructive current is 100kA (50/60Hz)
The transducer length is 610mm (24in)
The transducer diameter is 7.5mm (0.3in)
Minimum bending radius is 38mm (1.5in)
Cable length from transducer to BNC: 2.5m (98.4in)

Certifications

IEC 61010-1: Pollution degree 2
IEC 61010-2-032: 1000V CAT III/ 600V CAT IV safety rated
IEC 61010-031
UL94 approved
IP41 rated
CE
CSA certified

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website -
www.fluke.ie/freefluke (Ireland)
www.fluke.be/freefluke (Belgium)
www.fluke.nl/freefluke (Netherlands)
www/fluke.no/freefluke (Norway)
www.fluke.se/freefluke (Sweden)
www.fluke.com/en/freefluke (South Africa)
There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only €100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Specificaties
Kenmerk Waarde
Accessory Type Flexible AC Current Probe
For Use With Fluke 433/434/435/434-II/435-II/437-II
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.319,37
(excl. BTW)
1.596,44
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.319,37 €
Related Products
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. ...
A connector system designed specifically for electrically operated ...
Description:
A connector system designed specifically for electrically operated industrial vehicle battery and charging operations. The connectors come complete with solder contacts, cable clamp, mounting screws and polarising key. The polarising key can be used in 6 different orientations depending on ...
The CA8220 is optimised for maintenance and troubleshooting ...
Description:
The CA8220 is optimised for maintenance and troubleshooting of electrical equipment, electrical systems and in single phase and balance three phase systems.,The CA8220 includes measurements for testing and monitoring rotating machines in operation. including temperature, current , duration of in-rush ...
Built for detecting voltage quality or disturbance problems, ...
Description:
Built for detecting voltage quality or disturbance problems, the Fluke VR1710 is a single-phase, plug-in, fast and easy to use recorder ensuring users pin point root causes.Featuring easy recording of voltage trends, harmonics up to the 32nd, transients, flicker, dropouts ...