STMicroelectronics L6376D, Power Multiplexer Quad-Channel 500mA 20-Pin, PowerSO

Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

High-Side Driver Quad Intelligent Power Switch, STMicroelectronics

Intelligent high-side switches provide one or more channel MOSFET output switches to drive inductive, capacitive or resistive loads.

Multipower BCD technology
0.5A four independent outputs
9.5 to 35V supply voltage range
Internal current limit
Non-dissipative over-current protection
Thermal shutdown
Under voltage lockout with hysteresys
Diagnostic output for under voltage, over temperature and over current
External asynchronous reset input
Presettable delay for overcurrent

Intelligent Power Switches, STMicroelectronics

Specificaties
Kenmerk Waarde
Number of Inputs 4
Number of Outputs 4
Maximum Output Current 500mA
Mounting Type Surface Mount
Package Type PowerSO
Pin Count 20
Dimensions 16 x 11.1 x 3.3mm
Length 16mm
Width 11.1mm
Height 3.3mm
Maximum Operating Temperature +85 °C
Minimum Input Voltage 4 V
Minimum Operating Temperature -25 °C
17 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
6,86
(excl. BTW)
8,30
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
6,86 €
5 - 9
6,45 €
10 - 24
6,11 €
25 - 49
5,76 €
50 +
5,48 €
Verpakkingsopties
Related Products
Intelligent Power Switches (IPS) integrate the logic interface, ...
Description:
Intelligent Power Switches (IPS) integrate the logic interface, drivers, diagnostic and protection features of a control section and the power stage for high-side configurations.
Intelligent Power Switches (IPS) integrate the logic interface, ...
Description:
Intelligent Power Switches (IPS) integrate the logic interface, drivers, diagnostic and protection features of a control section and the power stage for high-side configurations.
The L6598 device is manufactured with the BCD™ ...
Description:
The L6598 device is manufactured with the BCD™ offline technology, able to ensure voltage ratings up to 600 V, making it perfectly suited for AC/DC adapters and wherever a resonant topology can be beneficial. The device is intended to drive ...
The VN340SP-33-E is a monolithic device developed using ...
Description:
The VN340SP-33-E is a monolithic device developed using STMicroelectronics’ VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. Active current limitation prevents dropping of the system power supply in case of shorted ...