STMicroelectronics STEVAL-ISV019V1 Battery Charger, Energy Harvesting for SPV1050

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics

The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.

First start-up at 500mV input
150mV to 4.25V input working voltage range
4.25V end of charge battery voltage
3.7V battery under-voltage protection

Battery Charging & Monitoring, STMicroelectronics

Specificaties
Kenmerk Waarde
Power Management Function Battery Charger, Energy Harvesting
Kit Classification Evaluation Board
Featured Device SPV1050
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
37,03
(excl. BTW)
44,81
(incl. BTW)
Aantal stuks
Per stuk
1 +
37,03 €
Related Products
The SIP powerful analogue battery charger and mains ...
Description:
The SIP powerful analogue battery charger and mains voltage booster equipped with analogue ammeter & Internal fuse protection. It is suitable for all lead acid batteries SLA AGM VRLA GEL. 200Ah maximum battery capacity for charging260A maximum boost or start ...
2/8 stage chargingUniversal AC input / Full rangeBuilt-in ...
Description:
2/8 stage chargingUniversal AC input / Full rangeBuilt-in active PFC function PF>0.95Protection: Reverse Polarity / Short circuit / Over voltage / Over temperatureCharger for lead-acid batteries3 color LED loading indicatorBuilt-in remote ON-OFF controlBuilt-in fan speed control (Depends on charging current). ...
3 stage chargingAC 115/230VAC selected by switchBuilt-in passive ...
Description:
3 stage chargingAC 115/230VAC selected by switchBuilt-in passive PFC function compliance to EN61000-3-2 Class A (option)Protection: Short circuit / Reverse polarity / Over voltage / Over temperatureCharger for lead-acid batteries2 color LED loading indicatorLow cost, High reliabilityFAN on/off control(Depends on ...
The Ansmann battery charger is designed for 2V, ...
Description:
The Ansmann battery charger is designed for 2V, 6V and 12V lead-acid, SLA batteries with a charge current of 400mA. This has EURO and UK plug type. Charging cable is 3.5m longInput supply voltage ranging from 100VAC to 240VACProtection against ...