Analog Devices ADL5902-EVALZ TruPwr Power Detector for ADL5902

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Evaluation Board for ADL5902 TruPwr™ Detector, Analog Devices

The ADL5902-EVALZ, from Analog Devices, is an evaluation board for the ADL5902 device. The ADL5902 us a TruPwr™ true rms responding power detector that has a 65 dB measurement range when driven with a single-ended 50 Ω source.
The ADL5902-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. It requires a 5 V/100 mA power supply for standard operation. The 5 V power supply should be connected to the pins labeled VPOS and GND. The RF input signal is applied to the SMA connector labeled IN and the output voltage is available on the SMA connector labeled VOUT.

RF & Microwave, Analog Devices

Specificaties
Kenmerk Waarde
Power Management Function Power Detector
Kit Classification Evaluation Board
Featured Device ADL5902
Kit Name TruPwr
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
129,35
(excl. BTW)
156,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
129,35 €
Related Products
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control ...
The NCP1072 / NCP1075 products integrate a fixed ...
Description:
The NCP1072 / NCP1075 products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a PDIP-7 or SOT-223 package, the NCP1072/5 offer a high level of integration, including soft-start, frequency-jittering, short-circuit protection, skip-cycle, a maximum ...
The NCP101X series integrates a fixed-frequency current-mode controller ...
Description:
The NCP101X series integrates a fixed-frequency current-mode controller and a 700 V voltage MOSFET. Housed in a PDIP7 package, the NCP101X offers everything needed to build a rugged and low-cost power supply, including soft-start, frequency jittering, short-circuit protection, skip-cycle, a ...
The NCP1081 is a member of ON Semiconductor's ...
Description:
The NCP1081 is a member of ON Semiconductor's high power HIPO® Power over Ethernet Powered Device (PoE-PD) product family and represents a robust, flexible and highly integrated solution targeting demanding medium and high power Ethernet applications. It combines in a ...