STMicroelectronics Electronic Speed Controller Reference Design Based on STSPIN32F0A for Electronic Speed Controller
- RS-stocknr.:
- 196-2545
- Fabrikantnummer:
- STEVAL-ESC002V1
- Fabrikant:
- STMicroelectronics
- RS-stocknr.:
- 196-2545
- Fabrikantnummer:
- STEVAL-ESC002V1
- Fabrikant:
- STMicroelectronics
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- IT
Productomschrijving
The STEVAL-ESC002V1 board is a very compact and ready to use Electronic Speed
Controller (ESC) reference design. The board can easily fit any small and light drone
for racing or surveying purposes, and is also highly suitable for any three-phase
BLDC application requiring a small form factor, minimal BoM, and high speed rotation
performance.
Together with the companion firmware package (STSW-ESC002V1), it represents a
solution for sensorless voltage mode six-step driving.
The heart of the board is the STSPIN32F0A advanced 3-phase brushless motor
controller that embeds an STM32 Cortex®-M0® microcontroller, voltage regulators,
signal conditioning circuitry and gate drivers in a small 7x7 mm² QFN package. The
power stage is based on the 2.8 mΩ low resistance, high speed STL140N6F7
MOSFETs, designed with STripFET™ F7 technology and able to deliver up to 20 A of
continuous current.
Controller (ESC) reference design. The board can easily fit any small and light drone
for racing or surveying purposes, and is also highly suitable for any three-phase
BLDC application requiring a small form factor, minimal BoM, and high speed rotation
performance.
Together with the companion firmware package (STSW-ESC002V1), it represents a
solution for sensorless voltage mode six-step driving.
The heart of the board is the STSPIN32F0A advanced 3-phase brushless motor
controller that embeds an STM32 Cortex®-M0® microcontroller, voltage regulators,
signal conditioning circuitry and gate drivers in a small 7x7 mm² QFN package. The
power stage is based on the 2.8 mΩ low resistance, high speed STL140N6F7
MOSFETs, designed with STripFET™ F7 technology and able to deliver up to 20 A of
continuous current.
Specificaties
Kenmerk | Waarde |
---|---|
For Use With | Electronic Speed Controller |
Kit Classification | Evaluation Board |
Kit Name | Electronic Speed Controller Reference Design Based on STSPIN32F0A |