STMicroelectronics STEVAL-EFUSE01 STEF01 Fully Programmable Universal Electronic Fuse Electronic Fuse for STEF01

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

The STEF01 E-fuse integrates a control circuit and a low on-resistance MOSFET switch and provides a full set of protections, including overcurrent, overvoltage and inrush current. You can adjust UVLO threshold, clamping voltage and overload current limits through mechanical trimmers.
An external MOSFET, driven by the STEF01 gate driver pin, can be mounted to implement a reverse-current blocking circuit. The inrush current can be controlled by the output voltage ramp rate, with the dedicated soft start circuit embedded in the STEF01 device. The STEVAL-EFUSE01 evaluation board lets you easily adjust the output voltage ramp rate at the desired startup time, by changing the Cdv/dt capacitor.
As most applications require a flag to signal that the output voltage is in the correct range, the STEVAL-EFUSE01 features a PG test point for information about the voltage drop on the pass element.
The STEVAL-EFUSE01 also features thermal latch and auto-retry thermal protection modes, selectable through a dedicated jumper configuration.

Specificaties
Kenmerk Waarde
Power Management Function Electronic Fuse
Kit Classification Evaluation Board
Featured Device STEF01
Kit Name STEF01 Fully Programmable Universal Electronic Fuse
16 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
34,20
(excl. BTW)
41,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
34,20 €
Related Products
The STEVAL-SPIN3201 board is a three-phase Brushless DC ...
Description:
The STEVAL-SPIN3201 board is a three-phase Brushless DC motor (BLDC) driver board based on the STSPIN32F0 motor controller with embedded STM32F0 MCU. The board is designed for sensored or sensorless vector control, FOC algorithms with 3-shunt sensing. • 48MHz STM32 ...
The STEVAL-IPM08B compact motor drive power board is ...
Description:
The STEVAL-IPM08B compact motor drive power board is based on SLLIMM™ (small low-loss intelligent molded module) 2nd series module ( STGIB8CH60TS-L). It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such ...
The STEVAL-IHM029V2 is a low-cost universal motor control ...
Description:
The STEVAL-IHM029V2 is a low-cost universal motor control evaluation board designed for the home appliance market, with particular focus on vacuum cleaners, food processors and power tools. This system features the 20-pin, 8-bit STM8S103F2 microcontroller running at 16 MHz (user-trimmable ...
The P-NUCLEO-IHM03 STM32 motor-control pack is a kit ...
Description:
The P-NUCLEO-IHM03 STM32 motor-control pack is a kit composed of the XNUCLEO-IHM16M1 board, the NUCLEO-G431RB board, a brushless Gimbal motor(GBM2804H-100T), and the DC power supply.This platform provides a motor-control solution for three-phase, low-voltage and lowcurrent DC brushless or PMSM motors. ...