Development Kit DC/DC Voltage Converter for use with LCD and OLED displays, Low Power Audio Applications, Very Compact

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Boost-INV 2 click is a very useful DC/DC voltage converter device, as can output both positive and negative voltage, boosted up to 15V and inverted to -15V, from a single fixed voltage input. The input voltage can vary between 2.7V to 5.5V, making the Boost-INV 2 click an ideal solution for powering devices with complex, split-rail power supply demands, using only a common battery. The Click board™ is equipped with two additional D/A converters, which make it possible to digitally set the output voltage, via the SPI.

12-Bit Resolution
±0.2 LSB DNL (typ)
±2 LSB INL (typ)
Single or Dual Channel
Rail-to-Rail Output
SPI™ Interface with 20 MHz Clock Support
Simultaneous Latching of the Dual DACs w/LDAC
Fast Settling Time of 4.5 μs
Selectable Unity or 2x Gain Output
450 kHz Multiplier Mode
External VREF Input
2.7V to 5.5V Single-Supply Operation
Extended Temperature Range: -40°C to +125°C
Applications
Set Point or Offset Trimming
Sensor Calibration
Digitally-Controlled Multiplier/Divider
Portable Instrumentation (Battery-Powered)
Motor Feedback Loop Control

Specificaties
Kenmerk Waarde
Kit Name Boost-INV 2 Click Board
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
23,19
(excl. BTW)
28,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
23,19 €
Related Products
The A Series power isolated DC to high ...
Description:
The A Series power isolated DC to high voltage DC converters are ultra miniature. These converters are ideal for applications where minimal size and weight are required. Input/Output proportionalQuasi-sinewave OscillatorControl PinCurrent - Low leakageLow Output/Input CapacitanceGalvanic Input to Output isolation1 ...
The MikroElektronika Buck-Boost converter click board is a ...
Description:
The MikroElektronika Buck-Boost converter click board is a buck-boost voltage regulator, a switching regulator topology that combines principles of the buck conversion (step-down) and the boost conversion (step-up). By combining these two topologies, MCP16331 INV click can output a regulated ...
Output Voltages:3.2V to 12.775V and –1.2V to –13.95V ...
Description:
Output Voltages:3.2V to 12.775V and –1.2V to –13.95V (LT3582)5V and –5V (LT3582-5)12V and –12V (LT3582-12)Digitally Re-Programmable (LT3582) via I2C for:Output VoltagesPower SequencingOutput Voltage Ramp RatesPower-Up Defaults Settable with Non-Volatile OTP(LT3582)I2C Compatible Interface (Standard Mode)All Power ...
Two Independent Circuits on One BoardEvaluates the MAX17220–MAX17225 ...
Description:
Two Independent Circuits on One BoardEvaluates the MAX17220–MAX17225 IC Family in a 6-pin μDFNEvaluates the MAX17220–MAX17225 IC Family in a 6-pin Wafer-Level Package (WLP)400mV to 5.5V Input Range1.8V to 5V Configurable Output Voltage in 100mV/stepUp to 100mA/225mA/425mA Output CurrentProven 2-Layer ...