Development Kit Buck 7 Click

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Eliminates External Components and Reduces Total Cost
No Schottky-Synchronous Operation for High Efficiency and Reduced Cost
Internal compensation for Stable Operation at Any Output Voltage
All Ceramic Capacitor Solution: Ultra-Compact Layout with as Few as Eight External Components
Reduce Number of DC-DC Regulators to Stock
Wide 4.5V to 60V Input Voltage Range
0.9V to 90% VIN Output Voltage
Delivers Up to 3.5A Over Temperature
100kHz to 2.2MHz Adjustable Frequency with External Synchronization
MAX17504S Allows Higher Frequency Of Operation
Available in a 20-Pin, 5mm x 5mm TQFN Package
Reduce Power Dissipation
Peak Efficiency > 90
PFM and DCM Modes for High Light-Load Efficiency
Shutdown Current = 2.8FA (typ)
Operate Reliably
Hiccup-Mode Current Limit and Autoretry Startup
Built-In Output Voltage Monitoring—(Open-Drain RESET Pin)
Resistor Programmable EN/UVLO Threshold
Adjustable Soft-Start and Pre-Biased Power-Up
High Industrial -40°C to +125°C Ambient OperatingTemperature Range/-40°C to +150°C Junction Temperature Range
Applications

Specificaties
Kenmerk Waarde
Power Management Function Buck Regulator
Kit Name Buck 7 Click Board
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
23,76
(excl. BTW)
28,75
(incl. BTW)
Aantal stuks
Per stuk
1 +
23,76 €
Related Products
Position Sensorless BLDC Drivers (no Hall Sensor required)180° ...
Description:
Position Sensorless BLDC Drivers (no Hall Sensor required)180° Sinusoidal Drive for High Efficiency and Low Acoustic NoiseSupports 2V to 14V Power SuppliesSpeed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)Built-In Frequency Generator (FG output signal)Built-In Lock-Up ...
The STEF01 E-fuse integrates a control circuit and ...
Description:
The STEF01 E-fuse integrates a control circuit and a low on-resistance MOSFET switch and provides a full set of protections, including overcurrent, overvoltage and inrush current. You can adjust UVLO threshold, clamping voltage and overload current limits through mechanical trimmers.An ...
The STEVAL-IHM038V1 system evaluation board implements a BLDC/PMSM ...
Description:
The STEVAL-IHM038V1 system evaluation board implements a BLDC/PMSM fan controller board which is based on the SLLIMM™-nano (small low-loss intelligent molded module) STGIPN3H60 and STM32F100C6T6B microcontroller. The STEVAL-IHM038V1 incorporates a complete inverter stage and a control stage to drive a ...
The STEVAL-IHM042V1 evaluation board is designed as a ...
Description:
The STEVAL-IHM042V1 evaluation board is designed as a complete dual motor field-oriented control (FOC) demonstration platform featuring STMicroelectronics’ ARM Cortex™-M4F 32-bit core-based STM32F303CC microcontroller with floating point support and two fully integrated DMOS L6230 3-phase motor drivers. It is ...