STMicroelectronics X-NUCLEO-PLC01A1 PLC Driver for STM32 Nucleo

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

X-NUCLEO-PLC01A1 Industrial PLC Expansion Board

The X-NUCLEO-PLC01A1 is an input/output expansion board which provides an STM32 Nucleo MCU board with industrial PLC (Programmable Logic Controller) functionality.

• 8 x inputs protected by a CLT01-38SQ7 digital termination array • 8 x outputs driving a VNI8200XP octal high-side solid-state relay
• Host communication: SPI bus protected by on-board Si8661 digital isolator
• Status LEDs: Power OK, SPI Activity, Fault, Over-temperature
• 16 x I/O activity LEDs
• Screw connectors for all protected I/O
• Compatible with STM32 Nucleo-64 MCU boards
• Arduino Uno r3 compatible Shield headers
• Designed for situations required to pass IEC61000-4-2 8kV and 15kV test standards
• Free development firmware and example library compatible with STM32Cube firmware

Suitable STM32 Nucleo MCU Boards

802-9412 NUCLEO-F030R8 Cortex-M0 core processor 802-9416 NUCLEO-F103RB Cortex-M3 core processor
802-9425 NUCLEO-F401RE Cortex-M4F core processor

STM32F4 Series 32-Bit ARM Cortex-M4 Microcontrollers, STMicroelectronics

The ARM Cortex-M4 based STM32 F4 series of high-performance MCUs with DSP and FPU instructions is an extension of the industry-leading STM32 portfolio towards even higher performance. Up to 180 MHz operating frequency.

Up to 2x USB 2.0 OTG FS/HS
SDIO (Secure Digital Input Output)
USART, SPI, I²C
I²S (Inter-IC Sound) + Audio PLL
16 and 32 Bit Timers
Up to 3x 12-Bit ADC
Low Voltage 1.7 V to 3.6 V

Specificaties
Kenmerk Waarde
Power Management Function PLC Driver
Kit Classification Evaluation Board
For Use With STM32 Nucleo
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
76 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,56
(excl. BTW)
11,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
9,56 €
Related Products
This demonstration board is based on the LED7706 ...
Description:
This demonstration board is based on the LED7706 and implements a high efficiency monolithic boost converter and six controlled current generators (rows) specifically designed to supply LEDs arrays used in the backlight of LCD panels. The device can manage an ...
This demonstration boards is based on the LED7707 ...
Description:
This demonstration boards is based on the LED7707 and implements a high efficiency monolithic boost converter and six controlled current generators (rows) specifically designed to supply LEDs arrays used in the backlight of LCD panels. The device can manage an ...
The STEVAL-ILL056V1 is a product evaluation board based ...
Description:
The STEVAL-ILL056V1 is a product evaluation board based on the LED5000, an 850 kHz fixed switching frequency monolithic step-down DC-DC converter designed to operate as a precise constant current source with an adjustable current capability up to 3 A DC. ...
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and ...
Description:
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and HIP2104DBEVAL1Z evaluation daughter cards constitute an evaluation tool for the HIP2103 and HIP2104 half bridge MOSFET drivers.The motherboard platform provides an on-board microcontroller that is used to generate appropriate control inputs to ...