XinaBox PU01 USB (Type A) Power Supply Power Supply

  • RS-stocknr. 174-3726
  • Fabrikantnummer PU01
  • Fabrikant XinaBox
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

xChip Boards

xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.

xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.

xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.

Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs

xChips connect to each other using an xBus connector, available from RS 174-4977.

Some xChips need an xPDI connector (RS 174-4974) to connect to programming interfaces, such as the IP02 or IP03.

PU01 – USB (Type A) Power Supply xChip (AP2114)

This xCHIP is designed to supply power to connected xCHIPS directly from a USB port without the need of an extension cable. Voltage regulation from USB power provided by on-board AP2114 LDO, which features 1 A continuous current output, good output regulation accuracy and short circuit protection.

Product Features

● 1 A continuous output current
● LED power indicator
● USB A connectivity without the need of a cable

Applications

● Provides system power

Product Specifications

● Output voltage accuracy: ±1.5%
● Output current: 1A
● Fold-back short current protection: 50 mA
● Low quiescent current: 60 μA
● Low output noise: 30 μV RMS
● OTSD protection
● Operating temperature range: -40ºC to 85ºC

Xinabox Modular Prototyping Boards

Specificaties
Kenmerk Waarde
Power Management Function Power Supply
Kit Classification Module
Kit Name USB (Type A) Power Supply
184 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
8,70
(excl. BTW)
10,53
(incl. BTW)
Aantal stuks
Per stuk
1 - 1
8,70 €
2 - 4
8,50 €
5 - 9
8,20 €
10 - 24
8,00 €
25 +
7,90 €
Related Products
The EA-PS 9000 2U is an adjustable and ...
Description:
The EA-PS 9000 2U is an adjustable and programmable 19" 2U power supply series with a high performance micro-controller and 16-bit resolution. Features include an 'auto-ranging' output for a flexible usage at either high voltage or high current, as convenient, ...
HIGHWIRE POWERSTAR lets you install IP cameras easily, ...
Description:
HIGHWIRE POWERSTAR lets you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable. Support for your camera is assured, thanks to HIGHWIRE's unique full-rate Ethernet over Coax technology, which has been tested and ...
The TPS65982 Evaluation Module is a complete BoosterPack ...
Description:
The TPS65982 Evaluation Module is a complete BoosterPack design for USB Type-C and USB Power Delivery applications. It allows the user to develop various power profiles and alternate modes. USB Type-C testing and verificationUSB Power Delivery (PD) testing and verificationTPS65982 ...
The NCP1094GEVB Evaluation Board from ON Semiconductor is ...
Description:
The NCP1094GEVB Evaluation Board from ON Semiconductor is designed for the high power (HIPO) Power over Ethernet Powered Device (PoE-PD) NCP1094 with an IEEE802.3. The PoE-PD has many features including classification, detection, under voltage lockout and inrush/operational current limit. For ...