ON Semiconductor NCP435FCT2GEVB Controlled Load Switch with Auto-Discharge Path Evaluation Board Load Switch

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The NCP435FCT2GEVB evaluation board is designed to quickly test the NCP435, a very low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy.

Specificaties
Kenmerk Waarde
Power Management Function Load Switch
Kit Classification Evaluation Board
For Use With Controlled Load Switch with Auto-Discharge Path
Featured Device NCP435FCT2G
Kit Name Controlled Load Switch with Auto-Discharge Path Evaluation Board
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
54,29
(excl. BTW)
65,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
54,29 €
Related Products
The OMNIFET series of fully auto-protected low-side drivers, ...
Description:
The OMNIFET series of fully auto-protected low-side drivers, are measured on the criteria of ruggedness and improved reliability. These solid state power switches are designed for inductive or resistive loads, especially in the automotive environment. Linear current limitationThermal shut downShort ...
The ISL8117, ISL8117A, are a synchronous Step down ...
Description:
The ISL8117, ISL8117A, are a synchronous Step down PWM (Pulse Width Modulation) Controllers that generate POL (Point-of-Load) voltage rails and bias voltage rails. The ISL8117A provides external configuration of the voltage loop compensation. Wide Power Supply from 4.5 V to ...
The demo board supports the LDO regulator NCP3337 ...
Description:
The demo board supports the LDO regulator NCP3337 in DFN10 package with adjustable output voltage. The ENABLE function allows turn the device to low consumption mode with quiescent current below 1 μA. The Power Good pin allows output voltage monitoring. ...
Semtech offers wireless power transmitter and receiver platforms ...
Description:
Semtech offers wireless power transmitter and receiver platforms for both direct and indirect charge applications in both standards compliant and non-compliant systems. Semtech is a member of the Wireless Power Consortium (WPC), and is active in helping shape the future ...