Intersil ISL9237EVAL2Z Battery Charger for ISL9237

  • RS-stocknr. 123-1001
  • Fabrikantnummer ISL9237EVAL2Z
  • Fabrikant Intersil
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

ISL9237, Buck-Boost Narrow VDC Battery Charger with SMBus and USB OTG Evaluation Board

The ISL9237EVAL2Z evaluation board demonstrates the performance of the ISL9237. The step up and step down narrow output voltage DC battery charger provides high light-load efficiency, fast transient response and seamless DCM/CCM transitions.
Input power in charge mode can be supplied from AC-DC charger adapters, USB Power Device ports or travel adapters.
When OTG function is enabled, the ISL9237 operates in the reverse step down mode to provide 5 V output at the USB port.

Input voltage range 3.2 V to 23.4 V (no dead zone)
System output voltage 2.4 V to 13.824 V
System power monitor PSYS output, Intel IMVP8 compliant
Up to 1 MHz switching frequency
Adapter current monitor (AMON)
Battery discharging current monitor (BMON)
Allows trickle charging of depleted battery
Supports On-the-Go (OTG) function for 2- and 3-cell rechargeable batteries
SMBus and auto-increment I²C compatible
Two-level adapter current limit available

Battery Management, Intersil

Specificaties
Kenmerk Waarde
Power Management Function Battery Charger
Kit Classification Evaluation Board
Featured Device ISL9237
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and ...
Description:
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and HIP2104DBEVAL1Z evaluation daughter cards constitute an evaluation tool for the HIP2103 and HIP2104 half bridge MOSFET drivers.The motherboard platform provides an on-board microcontroller that is used to generate appropriate control inputs to ...
Uninterruptible Power Supply and I2C Control HAT for ...
Description:
Uninterruptible Power Supply and I2C Control HAT for Raspberry Pi, ModMyPiUPS PIco HV3.0 A Stack 450 is an uninterruptible power supply by ModMyPi for Raspberry Pi models A+/B+/2/3. The power supply comes with an embedded measurement system which checks the ...
A Click accessory module for use with MikroElektronika ...
Description:
A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The FLICKER click board can be used to cyclically control devices such as alarm or signalling lights. The board uses an NA556 dual precision timer and an Omron ...
The NCP1406 is a monolithic micropower PFM step-up ...
Description:
The NCP1406 is a monolithic micropower PFM step-up DC-DC converter. This device is designed to boost single lithium or two cells AA/AAA battery voltage up to 25 V (with internal MOSFET) output for handheld applications. Target applications include OLED Power, ...