ON Semiconductor LB1836MEVB Motor Driver for LB1836M

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PH
Productomschrijving

LB1836MEVB - Bidirectional Motor Driver Evaluation Board, ON Semiconductor

The ON Semiconductor LB1836MEVB features the LB1836M-TLM-E (RS 757-0499) 2-channel low voltage, low saturation voltage bidirectional motor driver.

The LB1836M is used to control a motor directly using signals from a microcontroller. It is best suited to stepping motors with two-phase excitation and 1-2 phase excitation drive.

The output circuits are bipolar, with PNP transistors in the upper side and NPN transistors in the lower side.

Low voltage operation (2.5 V min)
Separate logic power supply and motor power supply
Brake function
Spark killer diodes
Thermal shutdown circuit

Motor Driver Evaluation Kits, ON Semiconductor

Specificaties
Kenmerk Waarde
Power Management Function Motor Driver
Kit Classification Evaluation Board
Featured Device LB1836M
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
40,16
(excl. BTW)
48,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
40,16 €
Related Products
The X-NUCLEO-IHM07M1 is a three-phase Brushless DC motor ...
Description:
The X-NUCLEO-IHM07M1 is a three-phase Brushless DC motor (BLDC) driver expansion board based on the L6230 device. The L6230 driver is optimized for six-step and FOC algorithms thanks to independent current sensing. • Operating voltage range: +8 to +48Vdc • ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby modeThe compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP ...
The X-NUCLEO-IHM14A1 motor driver expansion board is based ...
Description:
The X-NUCLEO-IHM14A1 motor driver expansion board is based on the STSPIN820 monolithic driver for stepper motors. It represents an affordable, easy-to-use solution for driving stepper motors in your STM32 Nucleo project, implementing motor driving applications such as 2D/3D printers, robotics ...