Eurotherm Power Control, Analogue, Digital Input, 40 A

  • RS-stocknr. 135-7439
  • Fabrikantnummer EPACK-3PH/40A/500V/XXX/V2/XXX/XXX/TCP
  • Fabrikant Eurotherm
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PL
Productomschrijving

EPack Series 3 Phase Power Controllers

EPack Series 3-phase power controllers from Eurotherm are designed to control a wide range of loads in various applications. Even if the loads are unbalanced, the control of each phase ensures complete and accurate control. The power controller has a high level of diagnostics that can be used for alarm management and monitoring for parameters such as impedance, energy counter and reactive power.

Features and Benefits

Nominal load current from 1 Amps to 125 Amps
Voltage up to 500 V
Compact DIN Rail and bulkhead mounting
Configurable via front panel
Plug and plug Ethernet communications with zero configuration networking
Controls a comprehensive range of loads that include; resistive, infrared, transformer, silicon carbide
Energy usage measurement
Advanced load diagnostics
Integrated dual port Ethernet switch for “daisy chained” communications
Modbus TCP, Ethernet/IP or Profinet

Specificaties
Kenmerk Waarde
Control Type 3 Phase
Function Load Control
Communication Port Type Modbus
Input Type Analogue, Digital
Maximum Current 40 A
Length 242mm
Width 227mm
Height 290mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.871,95
(excl. BTW)
2.265,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.871,95 €
Related Products
The PMA Digital 280-1 indicator ensures a fast ...
Description:
The PMA Digital 280-1 indicator ensures a fast reaction time with a scan rate of 100ms cycle time. The instrument offers customer-specific linearization for all sensors (16 segments). The maximum and minimum values are always stored and may be displayed ...
The IR33 series of universal electronic controllers from ...
Description:
The IR33 series of universal electronic controllers from Carel are a panel mounted controller offering an updated and upgraded module to replace its IR32 predecessor. The IR33 series controllers feature two independent control loops and now with the addition of ...
Fixed value or program controller2 parameter blocksAutotuningSetpoint changeover ...
Description:
Fixed value or program controller2 parameter blocksAutotuningSetpoint changeover (4 setpoint values)Ramp functionTimer function4 limit value monitoring functionsService counterIndividual operator levelSeparate application using structured text (ST code, option)Math and logic function (option)Fast wiring through ...
TST01 Series Thyristor stack designed for resistive and ...
Description:
TST01 Series Thyristor stack designed for resistive and inductive loads with phase angle controlled firing. The power controllers are compact with PA-firing, built in a rugged aluminium casing for easy handling and mounting. To save wiring time and costs, the ...