- RS-stocknr.:
- 422-8218
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 422-8218
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
General Purpose White
Ideal for potting electrical and electronic components and sub-assemblies
Hard, high gloss finish gives permanent (non repairable) environmental protection
Slight flexibility permits thermal expansion without stress
Low exothermic temperature rise protects components during curing
Cure time: 24 hours @25°C. Cure may be accelerated to a minimum of 30 minutes by baking at 50°C to 100°C.
Provides class E insulation
Flammability rating UL94V-0
Compatible with most printed circuit board components and materials including polystyrene capacitors
Non-staining
Hard, high gloss finish gives permanent (non repairable) environmental protection
Slight flexibility permits thermal expansion without stress
Low exothermic temperature rise protects components during curing
Cure time: 24 hours @25°C. Cure may be accelerated to a minimum of 30 minutes by baking at 50°C to 100°C.
Provides class E insulation
Flammability rating UL94V-0
Compatible with most printed circuit board components and materials including polystyrene capacitors
Non-staining
Potting Compounds: Twin Packs
Specificaties
Kenmerk | Waarde |
---|---|
Product Material | Epoxy |
Package Type | Pack |
Package Size | 250 g |
Special Properties | Environmental Protection |
Cure Time | 24 h |
Hardness | 85 Shore D |
Colour | White |
Maximum Operating Temperature | +120°C |
Minimum Operating Temperature | -40°C |
Odour | Characteristic |
Viscosity Measurement | 0.25 mPa/s at +25°C |
Operating Temperature Range | -40 → +120 °C |
Physical Form | Liquid |