Murata, SVM4A103A0L17R00 Linear Position Sensor

  • RS-stocknr. 170-4394
  • Fabrikantnummer SVM4A103A0L17R00
  • Fabrikant Murata
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

SVM4 Series Rotary Position Sensors

The rotary position sensors from Murata are designed to measure rotational angles from output voltages. They work by rotation changing the resistance of a slider. The sensor then converts this change into an output voltage. Murata rotary position sensors are very durable, providing a long rotational life time.
The SVM4 series are designed for consumer grade applications. These devices come in a smaller package at just 4 mm and offer long lifetime alongside high accuracy.

Features

Total Resistance Value 10kΩ
Total Resistance Value Tolerance ±30%
Linearity ±2%
Effective Rotational Angle(typical) 260°
Rotational Life(maximum) 1M cycles
Torque(maximum) 6mN/m
Rated Voltage 5 V dc

Position & Motion Sensors, Murata

Specificaties
Kenmerk Waarde
Output Type Linear
Mounting Type Surface Mount
Pin Count 3
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Maximum Operating Supply Voltage 5 V dc
Dimensions 4.5 x 4 x 2mm
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The LPM2610 from Figaro is a pre-calibrated sensor ...
Description:
The LPM2610 from Figaro is a pre-calibrated sensor module for LP (liquefied petroleum) gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2610-D00 gas sensor which incorporates a filter to reduce ...
Your electronics are spruced up with this Adafruit ...
Description:
Your electronics are spruced up with this Adafruit colour light sensor. The TCS34725, which has RGB and Clear light sensing elements, An IR blocking filter, minimises the IR spectral component of the incoming light. It allows colour measurements to be ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
The A1318LUA-2-T A1319LUA-5-T by Allegro Microsystems are Hall-effect ...
Description:
The A1318LUA-2-T A1319LUA-5-T by Allegro Microsystems are Hall-effect sensor ICs that are designed to fit angular positions with a high accuracy and small package size. The features of the Allegro A1318 and A1319 make them ideal for use in automotive ...