Hi-Force Single, Portable Low Height Hydraulic Cylinder, HLS201, 20T, 44mm stroke

  • RS-stocknr. 808-028
  • Fabrikantnummer HLS201
  • Fabrikant Hi-Force
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Low Height Cylinders

Use where collapsed height is a premier requirement in a lifting, levelling or pushing application
Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity

//media.rs-online.com/t_line/L808012-01.gif

Low Height Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately

Warning

  • Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specificaties
Kenmerk Waarde
Manufacturer Series HLS
Single/Double Acting Single
Capacity 20t
Stroke 44mm
Closed Height 102mm
Extended Height 146mm
Cylinder Effective Area 28.6cm²
Oil Capacity 126cm³
Outside Diameter 3.54in
Maximum Operating Pressure 10000 psi
Weight 4.8kg
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
396,35
(excl. BTW)
479,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
396,35 €
Related Products
For lifting and pushing applications where flexibility and ...
Description:
For lifting and pushing applications where flexibility and high cycle requirements existNon-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity. Suitable for use in a diverse ...
Combine minimum collapsed height with optimum strokeThey provide ...
Description:
Combine minimum collapsed height with optimum strokeThey provide a short adjusting and lifting force in confined work areasSteel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension.
Very low height cylinders combine minimum closed height ...
Description:
Very low height cylinders combine minimum closed height with maximum stroke to provide a short adjusting and lifting force in very confined work areasAll cylinders have a 6mm stroke and are manufactured to the same high standards as our existing ...
Industrial standard high quality single acting/spring return cylinders ...
Description:
Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming ...