- RS-stocknr.:
- 916-0915
- Fabrikant:
- RS PRO
210 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2160 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk (in een verpakking 10)
€ 2,014
(excl. BTW)
€ 2,437
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
10 + | € 2,014 | € 20,14 |
*prijsindicatie |
- RS-stocknr.:
- 916-0915
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- TW
Productomschrijving
RS PRO Y Tube-to-Tube Adaptor to Push In 4 mm to Push In 4 mm to Push In 4 mm 10 bar
This pneumatic Y fitting from RS PRO is suitable for connecting conduits in a wide range of compressed air and pressurised gas applications. The six-angle wrench design makes it compact enough to be installed in tight spaces, while the one-touch push-in connections make installation quick and simple.
The adaptor's body is made from polyoxymethylene (POM), which is a high-strength engineering plastic known for its rigidity, high dimensional stability and low friction. This allows it to handle considerable pressure without breaking. Its nickel-plated finish means it's resistant to corrosion and most contaminants, which helps extend its working life.
You can use this fitting with both nylon and polyurethane tubing. This adaptor has a broad operating pressure range that allows it to be used in a wide variety of compressed air applications, including spray coating and vacuum packing.
The adaptor's body is made from polyoxymethylene (POM), which is a high-strength engineering plastic known for its rigidity, high dimensional stability and low friction. This allows it to handle considerable pressure without breaking. Its nickel-plated finish means it's resistant to corrosion and most contaminants, which helps extend its working life.
You can use this fitting with both nylon and polyurethane tubing. This adaptor has a broad operating pressure range that allows it to be used in a wide variety of compressed air applications, including spray coating and vacuum packing.
Features and Benefits
- Body made from polyoxymethylene
- Nickel-plated finish
- Tube-to-tube connection style
- Connector A is a push-in 4 mm connection
- Connector B is a push-in 4 mm connection
- Connector C is a push-in 4 mm connection
- Maximum operating pressure of 10 bar
- Operating temperature range of 0°C to +60°C
- Y tube-to-tube adaptor pneumatic fitting type
Specificaties
Kenmerk | Waarde |
---|---|
Connector A | Push In 4 mm |
Connector B | Push In 4 mm |
Pneumatic Fitting Type | Y Tube-to-Tube Adaptor |
Connection Style | Tube-to-Tube |
Connector C | Push In 4 mm |
Body Material | Polyoxymethylene |
Maximum Operating Pressure | 10 bar |
Minimum Operating Temperature | 0°C |
Maximum Operating Temperature | +60°C |
Finish | Nickel Plated |