Legris LF3000 Series Tee Threaded Adaptor, Push In 6 mm to Push In 6 mm, Threaded-to-Tube Connection Style
- RS-stocknr.:
- 867-415
- Fabrikantnummer:
- 3193 06 10
- Fabrikant:
- Legris
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
60 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk (in een verpakking 5)
€ 6,418
(excl. BTW)
€ 7,766
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 5 - 20 | € 6,418 | € 32,09 |
| 25 - 45 | € 6,222 | € 31,11 |
| 50 + | € 6,016 | € 30,08 |
| *prijsindicatie | ||
- RS-stocknr.:
- 867-415
- Fabrikantnummer:
- 3193 06 10
- Fabrikant:
- Legris
Wetgeving en conformiteit
- Land van herkomst:
- FR
Productomschrijving
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
Features and Benefits
Full bore design
Exceptionally low leak rate
Available with BSPP and BSPT threads
Suitable for Vacuum or pressure applications
ISO 14743 compliant
Date coded for traceability and reliability
Automatically seals in both dynamic and static situations
Exceptionally low leak rate
Available with BSPP and BSPT threads
Suitable for Vacuum or pressure applications
ISO 14743 compliant
Date coded for traceability and reliability
Automatically seals in both dynamic and static situations
Note
In the Thread Size column, R indicates taper thread and G indicates parallel thread.
Threaded Tube Adaptors, Elbows and Tees
4 to 12mm compact fittings
Suitable for 99% vacuum
Push-in assembly: no tools required
Disconnect by depressing release collet
Plastic body
Nitrile O-rings
Suitable for 99% vacuum
Push-in assembly: no tools required
Disconnect by depressing release collet
Plastic body
Nitrile O-rings
A range of pneumatic elbow and tee adaptors for converting push-in to threaded type connections.
All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.
All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.
Specificaties
Kenmerk | Waarde |
|---|---|
| Connector A | Push In 6 mm |
| Connector B | Push In 6 mm |
| Pneumatic Fitting Type | Tee Threaded Adaptor |
| Connection Style | Threaded-to-Tube |
| Threaded Connection | G 1/8 Male |
| Manufacturer Series | LF3000 |
| Thread Material | Nickel Plated Brass |
| Body Material | Glass Reinforced Nylon |
| Maximum Operating Pressure | 20 bar |
| Maximum Operating Temperature | +80°C |
| Minimum Operating Temperature | -20°C |
| Finish | Nickel Plated |