- RS-stocknr.:
- 144-2643
- Fabrikant:
- RS PRO
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
299 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs 1 zak met 10
€ 8,92
(excl. BTW)
€ 10,79
(incl. BTW)
Bag(s) | Per Zak | Per stuk* |
1 + | € 8,92 | € 0,892 |
*prijsindicatie |
- RS-stocknr.:
- 144-2643
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- TW
Productomschrijving
RS PRO Straight Tube-to-Tube Adaptor to Push In 4 mm to Push In 6 mm, 9.9 kgf/cm², 990 kPa
Connect piping in your pneumatic system with one of these RS PRO straight tube-to-tube adaptors. It's made of tough polyoxymethylene (POM) plastic, so it's suitable for heavy-duty applications.
Both ends have a push-in style connection, which makes it easy to install or remove tubing. All you need to do is push a tube into one of the holes. When you're done, just push the sleeve to disconnect it from the fitting.
As part of the RS PRO range, these specialist adaptors have been tested for quality. Adaptors like these are often used inside workshops and repair shops to connect tubes used in compressed air cleaning. They're suitable for use with air only.
Both ends have a push-in style connection, which makes it easy to install or remove tubing. All you need to do is push a tube into one of the holes. When you're done, just push the sleeve to disconnect it from the fitting.
As part of the RS PRO range, these specialist adaptors have been tested for quality. Adaptors like these are often used inside workshops and repair shops to connect tubes used in compressed air cleaning. They're suitable for use with air only.
Features and Benefits
- Plastic body material
- Tube-to-tube connection style
- Maximum operating pressure of 9.9 kgf/cm², 990 kPa
- Operating temperature range of 0°C to +60°C
- Straight adaptor pneumatic fitting type
- Connector A is a push-in 4 mm tube connection
- Connector B is a push-in 6 mm tube connection
Specificaties
Kenmerk | Waarde |
---|---|
Connector A | Push In 4 mm |
Connector B | Push In 6 mm |
Pneumatic Fitting Type | Straight Tube-to-Tube Adaptor |
Connection Style | Tube-to-Tube |
Maximum Operating Pressure | 9.9 kgf/cm², 990 kPa |
Body Material | Plastic |
Minimum Operating Temperature | 0°C |
Maximum Operating Temperature | +60°C |