Norgren PNEUFIT Series Straight Threaded Adaptor, R 1/4 Male to Push In 8 mm, Threaded-to-Tube Connection Style
- RS-stocknr.:
- 210-2287
- Fabrikantnummer:
- 101250828 DIS
- Fabrikant:
- Norgren
Dit product is momenteel niet beschikbaar voor nabestelling.
We hebben dit product helaas niet op voorraad en het is op dit moment niet beschikbaar voor nabestelling.
Toegevoegd
Prijs Per stuk (in een verpakking 5)
€ 3,092
(excl. BTW)
€ 3,741
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 5 - 20 | € 3,092 | € 15,46 |
| 25 - 45 | € 3,004 | € 15,02 |
| 50 + | € 2,926 | € 14,63 |
| *prijsindicatie | ||
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 210-2287
- Fabrikantnummer:
- 101250828 DIS
- Fabrikant:
- Norgren
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
IMI Norgren Threaded-To-Tube Straight Adaptor, R1/4 Male To Push-In 8mm - PNEUFIT Series - 101250828
Looking for a durable adaptor to connect tubes to your valve ports? IMI Norgren's straight adaptor is made of nickel-plated brass, which makes it durable and rust-resistant, so is suitable for use in demanding industrial environments. It's pre-coated with a sealant to prevent gas from escaping through the valve when the equipment is under pressure. As this unit features a soft collet and O-ring to securely hold tubes without damaging it, you can reuse your hose after detaching the adapter.
Features & Benefits
• Maximum operating pressure of 18 bar, making it suitable for use in medium-duty to heavy-duty applications
• Wide operating temperature range of -20°C to +80°C, for reliability in challenging environments
• Standard R1/4 male threading for a secure grip, even with vibrating equipment
• Wide operating temperature range of -20°C to +80°C, for reliability in challenging environments
• Standard R1/4 male threading for a secure grip, even with vibrating equipment
Applications
• Automotive industries
• Water treatment plants
• Food and beverage industries
• Water treatment plants
• Food and beverage industries
Can I use this R1/4 fitting with a different threaded female connector?
No, you can't. When selecting the right fit for your application, it's important to check the threading on both connectors. Using a mismatched thread will let gas escape through the joint.
Specificaties
Kenmerk | Waarde |
|---|---|
| Connector A | R 1/4 Male |
| Connector B | Push In 8 mm |
| Pneumatic Fitting Type | Straight Threaded Adaptor |
| Connection Style | Threaded-to-Tube |
| Threaded Connection | R 1/4 Male |
| Manufacturer Series | PNEUFIT |
| Inlet Port | R 1/4 Male |
| Number of Inlet Ports | 1 |
| Outlet Port | Push In 8 mm |
| Number of Outlet Ports | 1 |
| Thread Material | Nickel Plated Brass |
| Angle | Straight |
| Maximum Operating Pressure | 18 bar |
| Mounting Type | Inline |
| Finish | Nickel Plated |
| Maximum Operating Temperature | +80°C |
| Minimum Operating Temperature | -20°C |
| Body Material | Nickel Plated Brass |
| Standards Met | ISO |