RS PRO Pneumatic Roundline Cylinder 20mm Bore, 40mm Stroke, ISO 6432 Series, Double Acting

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

10 - 25mm Diameter

The RS range of ISO 6432 cylinders give high performance and long life even when used with non-lubricated air. Available in both single acting and double acting versions, with magnetic stainless steel pistons on all models Ø12mm and above.

AISI 304 stainless steel body
AISI 303 stainless steel piston rod
Sintered bronze nose bearing
Pre-lubricated NBR seals
Anodised aluminium end caps
End of stroke buffer
Pressure range: 1-10 bar
Ambient temp. Range: -20°C to +80°C
Medium: Compressed air, filtered, lubricated or non-lubricated
Supplied with nose nut and piston rod nut

Note

Outward Thrust and Return Thrust figures quoted are at 6 bar.

Specificaties
Kenmerk Waarde
Manufacturer Series ISO 6432
Action Double
Bore 20mm
Stroke 40mm
Maximum Operating Pressure 10 bar
Cushioning Type Buffer
Maximum Operating Temperature +80°C
Minimum Operating Temperature -20°C
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
46,41
(excl. BTW)
56,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
46,41 €
5 - 9
44,98 €
10 +
43,53 €
Related Products
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
SMC MGP Compact Guide slide-bearing cylinders with End ...
Description:
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on ...
Conforms to Standards: VDMA 24562; (1992); ISO 6431Double-acting ...
Description:
Conforms to Standards: VDMA 24562; (1992); ISO 6431Double-acting and through-rod versionsMagnetic piston as standardClean line cylinderStainless steel piston rodIntegral reed switch slotSeal kits available (a set of O-rings to enable reconditioning of RS VDMA cylinders)Complete with piston rod nut.