RS PRO Double Action Pneumatic Pin Cylinder

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

RS Pro double-acting MINI CYLINDERS according to ISO 6432 suitable forfiltered and lubricated compressed air, as well as non lubricated air.- Pressure Range: 1 bar (0.1 MPa) to 10 bar (1 MPa)- Temperature Range: 0 °C (-20 °C with dry air) to + 80 °C

Specificaties
Kenmerk Waarde
Action Double
Bore 25mm
Stroke 160mm
Maximum Operating Pressure 10 bar
Cushioning Type Not Cushioned
Dimensions 30 Dia. x 300mm
Maximum Operating Temperature +80°C
Length 300mm
Minimum Operating Temperature 0°C
Diameter 30mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
63,00
(excl. BTW)
76,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
63,00 €
Related Products
High quality compact cylinder offers high performance in ...
Description:
High quality compact cylinder offers high performance in a small package. It is double acting and has a magnetic piston, high abrasion-resistant seals and thick end bumpers. The mounting hole spacing allows use of all standard VDMA cylinder mountings with ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
The MHL series from SMC are air grippers ...
Description:
The MHL series from SMC are air grippers ideal for gripping different sized parts. These pneumatic grippers are designed with dual piston construction creating a compact gripper with a large holding force. Wide opening air gripperParallel styleAuto switch capable.
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...