RS PRO Pneumatic Profile Cylinder 40mm Bore, 160mm Stroke, CDEM Series, Double Acting

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

VDMA Profile Range Ø 32-50mm

Conforms to Standards: VDMA 24562; (1992); ISO 6431
Double-acting and through-rod versions
Magnetic piston as standard
Clean line cylinder
Stainless steel piston rod
Integral reed switch slot
Seal kits available (a set of O-rings to enable reconditioning of RS VDMA cylinders)
Complete with piston rod nut

Note

The table below shows theoretical cylinder thrusts in Newtons according to cylinder bore, stroke out or in and air pressure. These figures should be multiplied by a factor of 0.85 to account for cylinder efficiency.

//media.rs-online.com/t_line/L304397-01.gif
//media.rs-online.com/t_line/L304397-02.gif
//media.rs-online.com/t_line/L480211-01.gif
Specificaties
Kenmerk Waarde
Manufacturer Series CDEM
Action Double
Bore 40mm
Stroke 160mm
VDMA Standard 24562
ISO Standard 6431
Maximum Operating Pressure 10 bar
Cushioning Type Rubber
Dimensions 295 x 54 x 54mm
Width 54mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
Length 295mm
Height 54mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
103,36
(excl. BTW)
125,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
103,36 €
Related Products
Festo DSBC series pneumatic cylinders with adjustable pneumatic ...
Description:
Festo DSBC series pneumatic cylinders with adjustable pneumatic cushioning at both ends of the actuator barrel. Featuring a high-alloy steel piston rod provides excellent running performance, low overall weight and long service life. These double acting pneumatic actuators have dual ...
RS Pro double-acting pneumatic cylinders according to ISO ...
Description:
RS Pro double-acting pneumatic cylinders according to ISO 15552 suitable forfiltered and lubricated compressed air, as well as non lubricated air.- Pressure Range: 1 bar (0.1 MPa) to 10 bar (1 MPa)- Temperature Range: 0 °C (-20 °C with dry ...
The Festo ISO cylinder has double-acting pneumatic cylinder ...
Description:
The Festo ISO cylinder has double-acting pneumatic cylinder according to ISO 6432 suitable for filtered and lubricated compressed air, as well as non lubricated air. Its piston diameter is 16mm with 40mm of stroke size. The elastic cushioning ring/plate on ...
Asco Numatic Series 453 Profiled Barrel Double-Acting Pneumatic ...
Description:
Asco Numatic Series 453 Profiled Barrel Double-Acting Pneumatic Cylinders offer precise cushioning, a choice of mounting options, and ease of maintenance. The cylinder design includes T-slot grooves on three sides, a hard anodised aluminium-profiled barrel, precise hard chrome steel high-performance ...