- RS-stocknr.:
- 480-2197
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 480-2197
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- IT
Productomschrijving
VDMA Profile Range Ø 32-50mm
Conforms to Standards: VDMA 24562; (1992); ISO 6431
Double-acting and through-rod versions
Magnetic piston as standard
Clean line cylinder
Stainless steel piston rod
Integral reed switch slot
Seal kits available (a set of O-rings to enable reconditioning of RS VDMA cylinders)
Complete with piston rod nut
Double-acting and through-rod versions
Magnetic piston as standard
Clean line cylinder
Stainless steel piston rod
Integral reed switch slot
Seal kits available (a set of O-rings to enable reconditioning of RS VDMA cylinders)
Complete with piston rod nut
Note
The table below shows theoretical cylinder thrusts in Newtons according to cylinder bore, stroke out or in and air pressure. These figures should be multiplied by a factor of 0.85 to account for cylinder efficiency.
Specificaties
Kenmerk | Waarde |
---|---|
Stroke | 80mm |
Bore | 40mm |
Action | Double |
Manufacturer Series | CDEM |
Length | 215mm |
Cushioning Type | Rubber |
Dimensions | 215 x 54 x 54mm |
Width | 54mm |
Maximum Operating Pressure | 10 bar |
Height | 54mm |
ISO Standard | 6431 |
VDMA Standard | 24562 |
Maximum Operating Temperature | +80°C |
Minimum Operating Temperature | -20°C |