Festo Pneumatic Cylinder 32mm Bore, 40mm Stroke, DSBC Series, Double Acting

  • RS-stocknr. 121-5253
  • Fabrikantnummer DSBC-32-40-PPVA-N3
  • Fabrikant Festo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DSBC Series Profile Cylinders - Adjustable Pneumatic Cushioning

Festo DSBC series pneumatic cylinders with adjustable pneumatic cushioning at both ends of the actuator barrel. Featuring a high-alloy steel piston rod provides excellent running performance, low overall weight and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Adjustable Pneumatic Cushioning

The DSBC PPV type adjustable cushioning pneumatic cylinders are equipped with a special cushioning piston as an extension to the main piston. This pneumatic cushioning builds up an air cushion to absorb energy in the end positions, building up and exhausting air in a targeted fashion.. This energy absorbing method makes these cylinders ideal for medium to heavy loads and high speed applications.

Features and Benefits

Corresponds to ISO 15552 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Adjustable end cushioning helping to reduce noise and vibration
High-alloy steel piston rod with threaded connector
Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications
Double acting operation

How do I mount the pneumatic actuator?

The DSBC series pneumatic round actuators conform to ISO 15552 standards allowing them to be mounted in any position to suit the required application. The ISO 15552 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

Festo ISO 15552 Proflie Cylinders

Specificaties
Kenmerk Waarde
Manufacturer Series DSBC
Action Double
Bore 32mm
Stroke 40mm
Pneumatic Connection G 1/8
VDMA Standard 24562
Piston Rod Thread Gender Male
ISO Standard 15552
Maximum Operating Pressure 12 bar
Cushioning Type Air
Dimensions 185.1 x 45 x 45mm
Weight 465g
Test Weight 465 g @ 0 mm Stroke
Height 45mm
Minimum Operating Temperature -20°C
Width 45mm
Length 185.1mm
Maximum Operating Temperature +80°C
Stroke Interval Weight 27 g @ 10 mm Stroke
8 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
105,12
(excl. BTW)
127,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
105,12 €
Related Products
RS Pro double-acting pneumatic cylinders according to ISO ...
Description:
RS Pro double-acting pneumatic cylinders according to ISO 15552 suitable forfiltered and lubricated compressed air, as well as non lubricated air.- Pressure Range: 1 bar (0.1 MPa) to 10 bar (1 MPa)- Temperature Range: 0 °C (-20 °C with dry ...
The Festo ISO cylinder DSBC-32-200-D3-PPSA-N3 with self-adjusting pneumatic ...
Description:
The Festo ISO cylinder DSBC-32-200-D3-PPSA-N3 with self-adjusting pneumatic end position cushioning. It has stroke 200 mm, piston diameter 32 mm, piston rod thread M10x1,25, cushioning. PPS. It has stroke 200 mmPiston diameter 32 mmPiston rod thread M10x1,25Cushioning. PPS.
The Festo ISO cylinder has double-acting pneumatic cylinder ...
Description:
The Festo ISO cylinder has double-acting pneumatic cylinder according to ISO 6432 suitable for filtered and lubricated compressed air, as well as non lubricated air. Its piston diameter is 16mm with 40mm of stroke size. The elastic cushioning ring/plate on ...
Conforms to Standards: VDMA 24562; (1992); ISO 6431Double-acting ...
Description:
Conforms to Standards: VDMA 24562; (1992); ISO 6431Double-acting and through-rod versionsMagnetic piston as standardClean line cylinderStainless steel piston rodIntegral reed switch slotSeal kits available (a set of O-rings to enable reconditioning of RS VDMA cylinders)Complete with piston rod nut.