Festo Pneumatic Cylinder 50mm Bore, 200mm Stroke, DSBC Series, Double Acting

  • RS-stocknr. 121-4769
  • Fabrikantnummer DSBC-50-200-PPSA-N3
  • Fabrikant Festo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DSBC Series Profile Cylinders - Self Adjusting Pneumatic Cushioning

Festo DSBC series pneumatic cylinders with self adjusting pneumatic cushioning at both ends of the actuator barrel. Featuring a high-alloy steel piston rod provides excellent running performance, low overall weight and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Self Adjusting Pneumatic Cushioning

The DSBC PPS type self adjusting cushioning pneumatic cylinders provide ideal cushion performance without the need for manual adjustments. The self adjusting cushioning gives a gentle and dynamic travel into the end position, even with changing loads and speeds. Equipped with a special piston as an extension to the main piston the design controls venting of the air cushion that has built up, as a result, no adjusting screw is necessary. Assembly and setting time is reduced using self adjusting cushioning that results in a high potential saving of working hours.

Features and Benefits

Corresponds to ISO 15552 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Adjustable end cushioning helping to reduce noise and vibration
High-alloy steel piston rod with threaded connector
Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications
Double acting operation

How do I mount the pneumatic actuator?

The DSBC series pneumatic round actuators conform to ISO 15552 standards allowing them to be mounted in any position to suit the required application. The ISO 15552 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

Festo ISO 15552 Proflie Cylinders

Specificaties
Kenmerk Waarde
Manufacturer Series DSBC
Action Double
Bore 50mm
Stroke 200mm
VDMA Standard 24562
Pneumatic Connection G 1/4
ISO Standard 15552
Piston Rod Thread Gender Male
Maximum Operating Pressure 12 bar
Cushioning Type Air
Dimensions 377.8 x 64 x 64mm
Weight 1.2kg
Maximum Operating Temperature +80°C
Test Weight 1190 g @ 0 mm Stroke
Height 64mm
Stroke Interval Weight 56 g @ 10 mm Stroke
Length 377.8mm
Width 64mm
Minimum Operating Temperature -20°C
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
147,42
(excl. BTW)
178,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
147,42 €
Related Products
ISOLine™ profile cylinder, 63mm diameter, 200mm stroke, ISO15552. ...
Description:
ISOLine™ profile cylinder, 63mm diameter, 200mm stroke, ISO15552. High performance, stability and reliabilityPolyurethane seals ensure efficient low friction operation and long lifeSwitches can be mounted flush with the profile barrel.
The SMC CP96-C series double-acting pneumatic cylinders feature ...
Description:
The SMC CP96-C series double-acting pneumatic cylinders feature both air and bumper cushioning. Using both air and bumper cushioning reduces the length of the cushion stroke reducing cycle time and the noise at the end of the stroke. CP96-C cylinder ...