SMC Pressure Sensor 1.5Mpa, 12 → 24V dc, IP40 1 MPa

  • RS-stocknr. 700-7566
  • Fabrikantnummer PSE540A-R06
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: IT
Productomschrijving

Compact Pneumatic Pressure Sensor

Series PSE digital pressure switches allow pressure to be controlled from a remote location. The PSE100 series controller has an easy to read, large, 4-digit LED display. Display units can be easily selected and changed. Series PSE510 is compact and lightweight, allowing the sensor to be mounted where needed. The use of stainless steel for all wetted parts (SUS630 for diaphragm, SUS304 for fitting) allows the PSE520 pressure sensor to be used in a wide variety of gas and fluid applications.
PSE series remote pressure and vacuum sensors have been expanded to include easy-to-use econ connectors from 3M or AMP.

Specificaties
Kenmerk Waarde
Suitable Media Air, Gas
Proof Pressure 1.5MPa
Supply Voltage 12 → 24V dc
IP Rating IP40
Minimum Operating Pressure 0MPa
Maximum Operating Pressure 1 MPa
Minimum Operating Temperature 0°C
Maximum Operating Temperature +50°C
6 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
64,31
(excl. BTW)
77,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
64,31 €
Related Products
The Druck Gauge Remote Pressure Sensor can be ...
Description:
The Druck Gauge Remote Pressure Sensor can be used with a single DPI705E as all sensors hold their own calibration data and are supplied with a 2.9m (9.5 feet) cable to enable further pressure range expansion on a DPI 705E. ...
Vacuum and positive pressure models available, with PNP, ...
Description:
Vacuum and positive pressure models available, with PNP, Analogue voltage or Analogue current outputsTwo colour digital display for fast "abnormal condition" identificationHigh precision resolution, typically 1/1000User selectable pressure unit displayCE marked in accordance with relevant European ...
The pressure sensor SPAU is suitable for monitoring ...
Description:
The pressure sensor SPAU is suitable for monitoring compressed air and non-corrosive gases. The variant with display offers the option of reading the pressure and setting values on-site. The pressure value is transmitted to the connec­ted control system as a ...
Festo SPAE series electronic pressure sensor with piezoresistive ...
Description:
Festo SPAE series electronic pressure sensor with piezoresistive pressure measuring cell. Featuring integrated signal processing, numerical percentage pressure indicator, control keys and a switching output, PNP/NPN switchable. Two switching signals and the pressure measurement value can be transmitted via ...