SMC AKB NPT 1/4 Female Check Valve, NPT 1/4 Female Port, -100 kPa → 1 MPa

  • RS-stocknr. 849-7231
  • Fabrikantnummer AKB02B-N02S
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: JP
Productomschrijving

SMC Vacuum Check Valve

Suitable for vacuum pressures of -0.03 to -0.99 bar
Low cracking pressure of 0.02 bar
Positive and vacuum compatible
Operating temperature range : +5 to +60°C
Available in Mpa measurement
NPT threadform ports (1/8", 1/4" & 1/2") also available

Specificaties
Kenmerk Waarde
Manufacturer Series AKB
Inlet Connection Type Threaded
Threaded Inlet Connection NPT 1/4 Female
Outlet Connection Type Threaded
Threaded Outlet Connection NPT 1/4 Female
Cracking Pressure 0.005MPa
Threaded Inlet Gender Female
Minimum Operating Pressure -100kPa
Maximum Operating Pressure 1 MPa
Maximum Operating Temperature +60°C
Threaded Outlet Gender Female
Threaded Inlet Thread Size 1/4
Threaded Outlet Thread Standard NPT
Minimum Operating Temperature -5°C
Threaded Inlet Thread Standard NPT
Threaded Outlet Thread Size 1/4
Operating Pressure Range -100 kPa → 1 MPa
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
12,56
(excl. BTW)
15,20
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
12,56 €
5 - 9
12,18 €
10 +
11,79 €
Related Products
VBQF series quick exhaust valves allow higher piston ...
Description:
VBQF series quick exhaust valves allow higher piston speeds to be achieved on the return stroke of single and double-acting drives. Pneumatic air flows from the control valve via the VBQF to the drive. The VBQF can be mounted in ...
The function fittings of RS Pro have been ...
Description:
The function fittings of RS Pro have been designed to suit a specific use. With a large variety of materials (brass, stainless steel, technopolymer, aluminium) they respond to the most extreme demand of pneumatic: flow controls, pressure regulators, unidirectional valves, ...
The function fittings of RS Pro have been ...
Description:
The function fittings of RS Pro have been designed to suit a specific use. With a large variety of materials (brass, stainless steel, technopolymer, aluminium) they respond to the most extreme demand of pneumatic: flow controls, pressure regulators, unidirectional valves, ...
Two non-return check valves which permit the free ...
Description:
Two non-return check valves which permit the free flow of air in one direction only, protecting the downstream side of the supply in event of an air supply failure. Manufactured from brass with nitrile rubber seals.Operating temperature : -20 to ...