SMC AK NPT 1/2 Female Check Valve, NPT 1/2 Female Port, 0.02 → 1Mpa

  • RS-stocknr. 849-7229
  • Fabrikantnummer AK4000-N04
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

SMC Vacuum Check Valve

Suitable for vacuum pressures of -0.03 to -0.99 bar
Low cracking pressure of 0.02 bar
Positive and vacuum compatible
Operating temperature range : +5 to +60°C
Available in Mpa measurement
NPT threadform ports (1/8", 1/4" & 1/2") also available

Specificaties
Kenmerk Waarde
Manufacturer Series AK
Inlet Connection Type Threaded
Threaded Inlet Connection NPT 1/2 Female
Outlet Connection Type Threaded
Threaded Outlet Connection NPT 1/2 Female
Cracking Pressure 0.02MPa
Threaded Inlet Gender Female
Minimum Operating Pressure 0.02MPa
Maximum Operating Pressure 1 MPa
Maximum Operating Temperature +60°C
Threaded Outlet Gender Female
Threaded Inlet Thread Size 1/2
Operating Pressure Range 0.02 → 1MPa
Threaded Outlet Thread Standard NPT
Threaded Inlet Thread Standard NPT
Minimum Operating Temperature -5°C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
22,85
(excl. BTW)
27,65
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
22,85 €
5 - 9
22,15 €
10 +
21,44 €
Related Products
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
Quick exhaust valve enables air to be exhausted ...
Description:
Quick exhaust valve enables air to be exhausted quickly from reservoirs and cylinders. Allows higher cylinder speeds to be achievedSimple, compact design and construction, and very reliable in operation.
Two non-return check valves which permit the free ...
Description:
Two non-return check valves which permit the free flow of air in one direction only, protecting the downstream side of the supply in event of an air supply failure. Manufactured from brass with nitrile rubber seals.Operating temperature : -20 to ...
Integral push in fitting connections for fast inline ...
Description:
Integral push in fitting connections for fast inline installation. These fittings are compact and lightweight with the advantage of one-touch fitting. Easily installed into your pneumatic installations. • Can be used in compressed air or vacuum lines• Suitable for use ...