SMC Double Action Pneumatic Pin Cylinder, CDJ2B10-45Z-B

  • RS-stocknr. 890-3244
  • Fabrikantnummer CDJ2B10-45Z-B
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CH
Productomschrijving

CJ2 Series Cylinders

The CJ2 series from SMC are miniature cylinders. Available in spring extend, spring return, or double acting offer stainless steel tubing and stainless steel rods.These pneumatic cylinders are available in various bore sizes and stroke lengths. Mounting options include basic, foot, front flange, and double rear clevis. Series CJ2 is auto switch capable.

Compact / lightweight mini air cylinders
Double acting, high speed
Built in magnet

Note

Outward Thrust and Return Thrust or Pull are calculated at maximum operating pressure (7bar).

Specificaties
Kenmerk Waarde
Action Double
Rods Single
Bore 10mm
Stroke 45mm
Piston Speed 50 → 750mm/s
Maximum Operating Pressure 0.7 MPa
Absolute Maximum Pressure 1.05MPa
Cushioning Type Rubber
Port Connection M5 x 0.8
Dimensions 119 x 12 x 12mm
Weight 24g
Minimum Piston Speed 50mm/s
Minimum Operating Temperature -10°C
Length 119mm
Height 12mm
Width 12mm
Maximum Piston Speed 750mm/s
Maximum Operating Temperature 60°C
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
41,50
(excl. BTW)
50,22
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
41,50 €
5 - 9
40,24 €
10 +
38,94 €
Related Products
SMC SV Series employ multi-pin connectors in place ...
Description:
SMC SV Series employ multi-pin connectors in place of conventional lead wires within manifold blocks. The design of the connector-type manifold enables any changes within the manifold station to be greatly simplified. Cassette base type manifolds offer the ultimate in ...
The MHF two finger pneumatic gripper compact design ...
Description:
The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for ...
The series CU free mount cylinder saves space ...
Description:
The series CU free mount cylinder saves space and allows direct and precise mounting, Options include auto-switch capabilities, free mount choices, recessed switch mounting grooves, non-rotating rod, single and double acting and rubber bumpers standard. Maximum operating pressure 7 bar, ...
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...