RS PRO Double Action Pneumatic Pin Cylinder

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

RS Pro double-acting MINI CYLINDERS according to ISO 6432 suitable for
filtered and lubricated compressed air, as well as non lubricated air.
- Pressure Range: 1 bar (0.1 MPa) to 10 bar (1 MPa)
- Temperature Range: 0 °C (-20 °C with dry air) to + 80 °C

Specificaties
Kenmerk Waarde
Action Double
Bore 16mm
Stroke 200mm
Maximum Operating Pressure 10 bar
Cushioning Type Not Cushioned
Force at 7 bar 112 (Traction) N, 126 (Thrust) N
Dimensions 19 Dia. x 309mm
Diameter 19mm
Minimum Operating Temperature 0°C
Length 309mm
Maximum Operating Temperature +80°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
55,90
(excl. BTW)
67,64
(incl. BTW)
Aantal stuks
Per stuk
1 +
55,90 €
Related Products
High quality compact cylinder offers high performance in ...
Description:
High quality compact cylinder offers high performance in a small package. It is double acting and has a magnetic piston, high abrasion-resistant seals and thick end bumpers. The mounting hole spacing allows use of all standard VDMA cylinder mountings with ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...